Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During use, the fur can change its original appearance, fade in the sun, and perhaps you will come up with the idea of ​​​​changing the appearance of the old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.

To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, you should apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint with?

If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.

Arctic fox fur

How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?

Deciding on the shade

If you do not know how to dye natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start painting

To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using spray paints. In this case, paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.

Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of ​​the fur product - if stains and bald spots appear, it is better to abandon the idea of ​​dyeing it yourself and entrust it to professionals.

Faux fur

Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of ​​fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.

The same hair dye is suitable for coloring - in the case of faux fur, you can experiment and give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Let's sum it up

We tried to figure out how to dye fur at home and presented several of the most effective methods. With the proper approach to the procedure, using high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.

Products made from faux fur (bags, fur coats) are visually almost indistinguishable from natural products and allow you to save on purchases. But during use, things inevitably lose their attractiveness and look faded, dull and worn out. The situation is easy to fix if the owner of the item knows how to dye faux fur at home.

How to choose paint?

Restoring your favorite item will require some time and effort. Choosing paint is the first task that needs to be resolved before starting work. To decide on the right color, it’s enough to imagine the product after dyeing and understand how you want to see it. If the owner only plans to restore things to their lost beauty, shades that are as close to natural as possible are suitable for him. Whereas a radical change in color implies a careful choice of dye.

Faux fur is dyed using standard hair dye. It is important that the mixture is of high quality, provides a stable result and does not spoil the material. Tonic shampoos will help those who are only going to slightly “refresh” their clothes or accessories without radically changing their color.

Where to start coloring?

Preparing faux fur for dyeing begins with thorough cleaning of the product. Traces of grease and dirt will negatively affect the result, the color will be uneven and will not appear completely. Contaminated areas should be treated with soapy water (it is convenient to use cotton wool) the day before the procedure.

After the fur has dried, testing is required. It consists of applying paint to a small area located in inconspicuous places. If you are satisfied with the resulting color, you can move on to working with the entire thing. So, how to dye faux fur at home?

How to dye faux fur correctly

To paint each area evenly, you need to slightly stretch the fur before applying the mixture. For convenience, you can take a wooden board, a chair, use clothespins and similar products.

When diluting paint, it is important to strictly follow the instructions; a soft brush will do as a handy tool. Coloring is carried out strictly in the direction of the hairs. To dye the base fabric, light pressure on the brush is required.

After applying the paint, you need to wait until the time has elapsed, information about which is in the instructions. Then the faux fur product is carefully cleaned (washed with water). It is convenient to remove dye residues with a clean, damp swab.

You should not wait for the material to dry before combing it; this should be done immediately after dyeing. Next, you need to give the faux fur time to dry completely and go over it with a comb again, giving the fibers the required position. Now you can admire the achieved result - the thing again began to look “like it came from a store.”

Important to know

The stretch remains until the product dries completely, otherwise a change in its size is inevitable. The item can not only shrink, but also stretch unsightly, as a result of which it will look even worse than before work. It is not always possible to achieve the desired color the first time you dye it (especially if you have no experience). In this case, it is allowed to subject the artificial fur to this procedure again. It is only important that at least 10 days have passed since the first attempt.

You also need to understand that the result depends on the degree of wear. Unfortunately, not all products that have been in use for a long time are subject to rehabilitation.

In some cases, it is impossible to do without painting the fur. You need to dye natural fur at home if you are making something out of it, if the fur of your fur coat has faded in the sun while being worn, or if you no longer like the color of your fur product.

But how to dye fur correctly so as not to spoil its appearance? Of course, the easiest way is to contact a specialized studio. But why, if anyone can dye or tint fur at home.

If you decide to dye natural fur yourself, remember that you need to clean it initially, since dirt prevents the dye from penetrating the structure of the pile.

Important: before you start dyeing a fur coat, vest, fur collar or headdress, treat this item with an alkaline solution that you can prepare yourself. To do this you will need:

1. Water - liter
2. Soda – 2 tsp
3. Dishwashing liquid – 1 tsp.
4. Ammonia from the pharmacy - 1 tsp.

Fur cleaning instructions:

• Prepare the solution by thoroughly mixing all substances.
• Apply a rich cream to the flesh. This is necessary in order to prevent it from drying out.
• Using a brush, apply the solution to the pile, distributing it evenly over the entire surface.
  Rinse the fur under running clean water.
• Lay the fur item horizontally and leave to dry at room temperature.

How to dye natural fur with hair dye?

First of all, having decided to dye natural fur yourself, you should decide on the color in which you will dye it. General recommendations boil down to dyeing fur products in darker colors. If, on the contrary, you want to dye it a light color, then the fur must first be lightened with hydrogen peroxide.

You will need:

• Hair dye
• Rubber gloves

Instructions

1. Before dyeing your fur coat, thoroughly soak it in water.
2. Dye the fur with hair dye.
3. Spread the paint evenly over the surface of the fur.
   Let the paint sit for as long as indicated in the paint instructions.
4. To wash off the dye, rinse the fur in warm water, to which you need to add a little table vinegar.
5. Dry the product by straightening it and laying it out to dry in a vertical position.

How to dry fur?

You need to dry the fur correctly, otherwise you can irreversibly ruin its appearance.
Never blow dry your fur; use a steamer instead.

After drying the fur with a stream of steam, comb it with a fur brush, which can be purchased at a pet store. You need to comb the fur against the growth of the pile.

To give your fur a natural shine, you can rinse it with hair balm or a solution that you can prepare at home. Using these products will allow you to give your fur a natural shine and softness.

How to tint fur with spray?

As a rule, at home, the spray is used to tint long ends of fur. At the same time, the undercoat and undercoat itself remain intact.

You need to spray the spray on the fur at a distance of 60-70 cm from its surface. You need to distribute the coloring matter slowly, smoothly moving the can from one side to the other.

As soon as the tips of the fibers are dyed, comb the fur with a brush to prevent it from further sticking and remove excess moisture.

In addition to hair dye and spray, you can use hair tinting shampoo at home.

This instruction on how to dye fur at home is for informational purposes only. Also recommends watching a video demonstrating the entire process.

How to dye faux fur

Once you decide to dye your faux fur item, decide what color you want to dye it. Perhaps it just needs to be updated, giving it a fresh look.

You can dye faux fur with hair dye. If you need to update your color, use permanent hair dye. If you just want to refresh your color, use a hair tinting shampoo or spray.

Before painting, it is recommended to clean the faux fur from traces of grease and dirt, which most often arise from contact with the skin. If the fur is not cleaned first, the dye may be distributed unevenly.

To clean faux fur at home, it is enough to use a regular soap solution, which can be applied with a sponge.

When you start painting, make sure that the color you choose will go well. To do this, apply paint to the pile from the reverse side of the product. If you are satisfied with the result, feel free to start painting the fur.

Important: prepare the faux fur product by laying it flat on the surface and pulling it along the edges, otherwise the fur will be dyed in shreds.

When dyeing artificial fur, strictly follow the instructions for the hair dye.

After the time specified in the instructions has passed, wash off the paint. Moreover, you can hand wash the product without using powder or shampoo. Just do it without fanaticism!

While still wet, the faux fur product needs to be combed and allowed to dry, and after it is completely dry, it needs to be combed again.

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you will give the product a second life at minimal cost.

Preparation

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? You can use a special product or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how it “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

How to apply paint?

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their rich color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or allow it to dry naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

How to dye faux fur

Products made from it are very popular due to their attractive appearance and reasonable cost. But over time, faux fur needs painting.

1. If you want to radically change the color of the product, choose hair dye with a high degree of durability. To refresh the shade, a tinting shampoo is suitable.
2. Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.
3. In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

Almost every woman has a fur item in her wardrobe. During prolonged wear, natural fur loses its attractiveness and becomes faded. Some fashionistas dream of changing the color, making it more fashionable and bright. It is quite possible to dye fur at home, the main thing is to adhere to the basic rules given below.

Preparing for coloring

Before you begin the dyeing process, you need to clean the item. This will allow you to paint the product evenly without leaving pale areas on it. A solution prepared from the following ingredients will allow you to carry out this procedure well:

• salt (2 tbsp);
• ammonia (1 tbsp);
• baking soda (2 tablespoons);
• washing powder (1 tbsp);
• warm water in the amount of two liters.

The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning, use a damp cloth or clean cloth to rinse the soap solution several times. In order for the core (skin) on the back side of the product not to shrink, it must be moist, so it should be wetted.

Interesting! You can clean the item with regular shampoo intended for hair or dishwashing detergent.

Some use aggressive substances: kerosene or lighter refill. With this method, you must always remember that their use can significantly worsen the appearance of the products.

Dry a fur collar or fur coat on hangers in natural conditions, away from heating devices and sunlight, on the street or in a room with good ventilation.

Types of fur

Before you paint this or that thing at home, you need to understand the characteristics of the material. Only in this case can you achieve the desired result and get the desired color or shade. The easiest items to dye are those made from rabbit, mink, and chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.

Important! Dying thick fur will require a lot of paint and time. But the result will please the owner of the wardrobe item with a good color that will last for quite a long time.

If the fur coat is made from beaver, you should not even try to lighten it, as it will acquire a yellow tint. The muskrat can behave very unpredictably, since not everyone may like the pinkish shades with whitish areas. After some time, the paint will fade and the product will take on a completely different appearance.

Arctic fox coloring

You can paint the arctic fox product in specialized workshops. The cost of such a service is quite high, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home yourself. To do this you need to do the following:

1. Choose the right paint. It is sold in hardware stores. If you can’t find a suitable color, there is another option - dyeing the fur at home with hair dye. Similar dyes are sold in a wide range of colors: black, red, gold, brown, red and other shades; choosing them will not be a problem.
2. Strictly following the instructions, dilute the dye.
3. Put a mask or respirator on your face and gloves on your hands.
4. It is recommended to treat the flesh with Vaseline, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
5. Dyeing can be done on both wet and dry arctic fox fur. In the first case, the paint lays on the surface quite softly. Apply the substance quickly using a hairdressing brush. This should be done carefully so that there are no unpainted areas left.
6. If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
7. The Arctic fox can get a beautiful, rich shade if only the ends of the pile are painted. Typically, light-colored coloring compounds are used for this.
8. You can refresh a fur wardrobe item with a spray, painting only the ends. You need to purchase paint intended for suede, which comes in an aerosol. Holding the can at a great distance, you need to make uniform movements. This is a simple and fast way.

After completing the procedure, the arctic fox fur is left for several minutes to obtain the desired shade. The time is indicated on the package. Now you should treat the product by preparing the following solution: dilute 5 tbsp in 2 liters of water. spoons of vinegar. As soon as it is ready, immerse the item in it.

Vinegar perfectly fixes the color, gives the fur additional shine and softness, significantly improving the appearance of a fox fur coat or collar. To prevent the item from becoming deformed, the flesh is stretched on the table, secured with clothespins.

To give the Arctic fox a lighter tone, use a hair lightener, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, rinse the fur and send it to dry.

Dyeing a mink coat

Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired tone of paint, a spray bottle, a comb with thick teeth, rich cream or glycerin, shampoo and hair conditioner. Now you need to do the following steps:

• clean the item from dust, dirt, grease;
• treat the skin (inner space) with a greasy substance;
• prepare the coloring composition in accordance with the instructions;
• moisten the surface of the product;
• apply a dye to the pile using a spray bottle;
• comb hairs;
• wash off the paint with shampoo diluted with water;
• treat the surface with balm.

The procedure is completed, all that remains is to dry the product, after applying the cream to the inside and combing the hairs.

In the same way you can dye silver fox fur, products made from mouton and any other material. For silver fox, the paint chosen is mainly black or brown. For a mouton fur coat, dark reddish shades and chestnut color are best suited.

Dyeing a fur collar

It is not always necessary to completely paint an item. In some cases, it is enough to dye a fur collar at home. This is quite easy to do using regular hair dye. First, the collar is cleaned of dust and dirt, dried, and then the dyeing process begins:

1. Using the instructions, you need to dilute the paint.
2. For uniform coloring, the collar is slightly moistened with water.
3. The coloring composition is applied by hand (you should first put on gloves). The process should be done quickly, distributing the paint well throughout the pile.

After completing the procedure, the collar is washed well with water and rinsed in a vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned to the base with needles.

Faux fur

Some people prefer to buy faux fur products. In many characteristics it is not inferior to natural raw materials and sometimes even surpasses them. It can also be colored using hair dye. First, you need to select the tone of the dye, clean the product, removing dirt, dust, and grease from it, using a soap solution. After this, remove the remaining soap solution with a damp swab.

Treatment should be carried out one day before staining.

However, you should know that faux fur is dyed in dark colors. You should buy high-quality paint so as not to spoil the thing.

The coloring composition is obtained by strictly following the instructions. After this, it is applied to the artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, and if necessary, excess paint is removed with cotton swabs. After this, the still damp fibers are combed with a sparse comb and the product is sent to dry.