You can make a large, lush and beautiful artificial Christmas tree yourself. Its shape can be different, which will depend on the technique of making the frame for the tree. We will show you four master classes showing you step by step how to make a Christmas tree with your own hands.

Master class No. 1: Christmas tree made of artificial branches

You can make a New Year's tree from artificial spruce branches, the height and splendor of which you can adjust yourself. The manufacturing process itself, if you have a ready-made wire frame, is quite simple.

Materials

To make a Christmas tree from artificial branches you will need:

• wire frame;
• fir branches;
• garland;
• wire cutters;
• cable ties;
• lush bow or ribbon.



Step 1. First, start with the wire frame. An excellent base for a Christmas tree would be tomato trellises, which are sold in the form of a wire cone. If you need a tree that is taller or smaller than the original trellis, you can modify it slightly. For a smaller tree, you will need to remove some of the rings and wire, and to make the tree larger, combine several grids, inserting one into the other.



Step 2. Attach a cable tie to the top of the resulting pyramid from the gratings so that the rods form an acute angle.



Step 3. To decorate the Christmas tree, wrap the wire lattice with artificial branches if, as in this master class, they are made on a wire frame. If your branches are softer, secure them with cable ties by nipping off the ends.



Step 4. Completely shape the tree by layering artificial fir branches from bottom to top, leaving no gaps.





Step 5. Decorate the Christmas tree with a garland, and place a lush bow made of ribbons or fabric in a contrasting color at the very top of the tree.





Your Christmas tree is ready. By leaving the sharp ends of the wires at the bottom of the wire frame, you can install the tree in your yard. Without them, the tree will stand stably on the floor of the house.

Master class No. 2: DIY Christmas tree made of white tinsel



Using the same wire frame for vegetables, you can make an original snow-white New Year tree, which in its appearance will resemble trees covered with snow.

Materials

To make a Christmas tree from white tinsel with your own hands, prepare:

• wire frame for vegetables;
• thick stationery erasers;
• lush white tinsel;
• tape or white cable ties;
• original decorations for the Christmas tree or garland.

Step 1. Give the wire frame for vegetables the desired shape. To do this, connect the rods at the top using a thick rubber band. It is advisable to take a light-colored elastic band so that it eventually blends in with the tree.



Step 2. Start wrapping the formed wire frame with lush tinsel. To do this, secure the end of the tinsel with a small piece of tape or a cable tie at the top of the wire frame.

Step 3. Make the coils as tight as possible. In places where the tinsel touches the wire, you can additionally secure the decor with pieces of tape or light-colored cable ties.
Carefully trim the latter so that they do not stick out from your product. Don't forget to secure the tinsel to the bottom of the wire base.



Your Christmas tree is ready! Now you can decorate it; it will be interesting to look at such an unusual tree with a garland or original decorations in the same cool colors as the tree itself.



Master class No. 3: DIY Christmas tree made from pasta and tinsel



If you like unusual New Year's crafts, you can safely try to create one like this. The process of making a Christmas tree can captivate not only you, but also your children.

Materials

To make a Christmas tree from pasta and tinsel with your own hands, you will need to prepare:

• feather pasta;
• a large sheet of paper or Whatman paper;
• stapler;
• scissors;
• hot glue sticks;
• heat gun;
• thick cardboard;
• green tinsel;
• Christmas balls;
• star for decoration.

Step 1. Make a blank from paper to create a Christmas tree. To do this, roll a thick sheet of paper into a cone and secure its edges with a stapler or glue. Cut the bottom of the cone so that it stands stable on the table.

Step 2. Place a thick sheet of cardboard on your work table. It will be needed to protect the surface from paint.

Step 3. Using hot glue, attach the feather macarons to the cone base. Place them from top to bottom in the form of a snake, place the pasta quite tightly.



Step 4. Cover the entire workpiece with a thin layer of golden-colored spray paint. If necessary, apply a second coat.

Step 5. After the paint has dried, secure the end of the tinsel to the top of the tree with hot glue. Start wrapping rain around the base of the tree in a spiral. At the bottom of the cone, also secure the tip of the tinsel with hot glue.



Step 6. Decorate the Christmas tree with toys and garlands. You can leave it as is, it is already ready.

If you want to turn it into something like a topiary, glue a round blank to the base of a cardboard cone. Attach a wooden stick to it with hot glue. Place the stick itself in a flowerpot filled with plaster, gravel or plasticine. Be sure to decorate the top of the flowerpot filler. Your original pasta tree is ready.

Master class No. 4: DIY Christmas tree made of wire and tinsel



Making a Christmas tree from tinsel on a wire frame, demonstrated in this master class, is slightly different from what was shown earlier. In this case, the Christmas tree will closely resemble the natural one, imitating its paws.

Materials

In order to make your own Christmas tree from wire and tinsel, you will need to prepare.

Larisa Savchuk

Master class on making a Christmas tree from tinsel in five minutes!

Today I want to share an idea for making a Christmas tree from tinsel. The method of making it is very simple and does not take much time, and the result, it seems to me, is obvious!

A preschooler of any age can make such Christmas trees, which is very important for us teachers!

To make a Christmas tree we will need: cardboard of any size for cones, tinsel of any color, multi-colored pieces of torn tinsel, glue stick.

So let's get started!

1. Roll a sheet of cardboard into a cone and glue the corner.

I wound several cones of different sizes at once.

2. Cut off the excess cardboard at the base so that the cones stand.

3. Cut off the top of the cone just a little and insert the end of the tinsel into the hole. We wrap the tinsel in a spiral around the cone. The end of the tinsel at the bottom of the cone is secured.

4. One, two and our Christmas tree is ready!

And then another one.

And another one!

And further! I wrapped four Christmas trees, barely stopped - how fast, easy and mesmerizing it is!

5. Now we decorate the Christmas tree. For this we will need multi-colored pieces of tinsel.

6. We wrap pieces of tinsel around your finger and you get these multi-colored balls - decorations.

7. Use tinsel balls to decorate the Christmas tree.

And these Christmas trees are beautiful even without decorations!

These are the wonderful Christmas trees I got!

And last New Year I made such a Christmas tree to decorate the New Year's table. She wrapped a bottle of champagne in tinsel. Try it - it will be beautiful, unusual and with a surprise!

There are many ways to create a New Year’s mood in your home yourself, for example, making an unusual Christmas tree from improvised materials. It won't take much time, but will be a wonderful additional decoration for the New Year's decoration. Today we will look at several possible ways to make a Christmas tree with your own hands.

Christmas tree made of tinsel and sweets

In order to make a Christmas tree from tinsel and candies, we will need cardboard, tinsel, glue and candies. The first step is to roll a cone out of a sheet of cardboard and fasten the edges with a stapler, after which, in a spiral, glue tinsel to the cone. We decorate a similar Christmas tree with candies. The table decoration is ready!

Christmas tree made of champagne and tinsel

As in the previous version, we will need tinsel, but this time a bottle of champagne will act as the base of the tree. Carefully wrap the bottle in tinsel, sticking it to the glass using double tape or glue. You can decorate the resulting artificial Christmas tree by placing candies or any other small decorations. And as a finishing touch, place tangerines under the bottle. Such a beautiful tree made of tinsel and a bottle of champagne will look great on the holiday table.

Tinsel tree on the wall

This homemade tree is suitable for those who do not have the opportunity to put up a Christmas tree. Using glue, tape or pins, the tinsel is attached to the wall. The silhouette of a Christmas tree on the wall will create a festive mood in your home, and if you decorate it with a garland, it will look great.

Christmas tree made of tinsel and wire

Using wire you can create various shapes. In order to make a Christmas tree from wire, you need to bend the “skeleton” of the Christmas tree out of it, onto which tinsel is attached with glue. Such a Christmas tree can be decorated with candies in the same way.

The main thing to remember is that we create the New Year’s mood ourselves. The more effort we put into this, and the more we please our loved ones, the more pleasant it is for us. Happy New Year!

Click Class

Tell VK

We continue to decorate our home for the winter holiday. We have already made various ones, hung them on the windows and walls. Now we want to give symbolism to the holiday. And this, of course, is the main princess of the celebration - the Christmas tree. I know that many people feel sorry for the trees and replace them with artificial analogues. But sometimes you just want to make something yourself in order to get satisfaction from the action and an accent in the decor.

All craft ideas are easy to do with your kids. To make the job easier, prepare the basics in advance. And try not to skimp on decor. Buy more different beads, ribbons, ribbons, beautiful buttons. Collect small toys from kinders and decorate with them. And they will go to work and will not wallow.

You can create beauty from everything you have at hand. The main thing is to apply a bit of imagination and all your accuracy to this. With modern devices, such as a glue gun, you can give the product original shapes and fix different textures and materials.

I know that corks from wine bottles and ice cream sticks are also used. Well, we don’t have any traffic jams at home, and the sticks have long been sold out for various needs, so we move on to materials that any housewife will definitely have - pasta and yarn.

Let's start with pasta. I know that they make various snowflakes. It turns out that they are also suitable for a Christmas tree.

We will need:

• A pack of pasta (it's better to take feathers)
• Glue gun
• Sheet of cardboard
• Dye
• Decor

It is better to prefer the “feather” or “spiral” shape. Choose a good manufacturer so that all the pieces are even and the same length.

First of all, we glue a cone out of cardboard. I do this by simply twisting the sheet around my hand. To prevent the workpiece from falling apart, we fasten it with a stapler.

And now we trim the base so that the tree stands straight and not crooked.

We always start from the foundation. The first two rows are “put down”, i.e. Glue them so that they lie on the surface, so the product will be more stable.

And subsequent rows need to be raised exactly on the previous ones by an amount equal to half the “spiral”.

When you finish the top, we begin to cover the entire craft with paint.

You can take green, or you can buy gold or silver paint in a can. Only then you need to spray it not at home.

I really like the result. It doesn’t take much time, but it looks very elegant.

Now it’s the turn of yarn and cord.

To make a Christmas tree out of yarn, you need to wind the threads exactly above each other on a paper cone. Periodically fastening it with hot glue to the base.

Decorate with decor.

This product is made even faster than from pasta.

You can decorate them with buttons.

We will need:

• Wire
• Decor

First we select the wire. It should be tough and not thin. From it we roll up a cone-shaped spiral. We check for stability. The bottom can be wrapped twice.

We begin to string the cord onto the wire.

Dry and decorate.

The glue will give the structure additional strength and will not allow the cord to slide down along the frame.

Volumetric Christmas tree made of paper

Paper is always the first thing the word “craft” is associated with. And from it you can create not just one Christmas tree, but an entire spruce forest, in which not a single tree will be the same!

Let's say we want a paper tree to make us happy on the kitchen table. Then you need to make it fluffy and voluminous. And also as stable as possible.

So, I have selected several detailed master classes with a clear description of the process.

Option 1

We will need:

• Cardboard cone
• Green paper in different shades.

We cut out many circles of the same size from paper.

And we begin to glue their edges to the cone, observing the rows.

The first layer always goes at the base.

This craft is accessible in terms of complexity, even to a two-year-old child. And it looks quite rich because of the different shades of the same color.

Option 2. Terry cone herringbone

Cut out 4 semicircles. Each of them is 2 centimeters smaller in diameter than the previous one.

Glue the blanks into a cone and slightly cut the edges around the perimeter to get volume. Fold the terry edges a little.

Now we glue a smaller cone onto the largest piece. And so on downwards.

That's the whole simple process.

Option 3. Let's make a spruce out of paper circles

Cut out 4 circles. Each of them is 1 centimeter smaller than the previous one.

Then fold each circle in half 3-4 times.

We also make a base from paper. You can wrap green paper around a pencil or kebab stick.

We string the round blanks onto the trunk in descending order of size.

To give stability, you can place the trunk in plasticine, wax or wine cork.

Option 4

We mark 15 circles, each time reducing the diameter by 1 centimeter. Then we divide each circle into 12 equal parts, drawing lines through the center.

From the center, mark half the radius and draw a circle. Now we cut the lines clearly to the drawn circle.

Glue the ends of each petal together.

When you have completed all the levels, start assembling the Christmas tree from the widest row to the smallest.

How do you like the ideas, I think you will find ideas for yourself.

Crafts from cotton pads for the New Year in kindergarten

Was your child dumbfounded by the task that you need to bring a craft to kindergarten tomorrow? And outside the window, of course, it’s already night. Then you can use a package of cotton pads. In most families they are actively used.

We will need:

• Packaging of cotton pads
• Cardboard for cone base
• PVA glue
• Decor

We roll up the cardboard frame and connect the edges with a stapler.

Take a cotton pad and fold it in half.

Then we place two ends of a cotton semicircle on harmless PVA glue.

And glue the workpiece to the base, having previously smeared its fold with the same PVA glue.

We do this row by row. It is better to glue the cotton pads closer to each other so that there are minimal gaps.

All that remains is to decorate the delicate beauty!

Children in kindergarten will definitely like your product, and they won’t be ashamed in front of other parents.

DIY craft from napkins

Another very affordable material is napkins. You can use the most inexpensive and plain ones.

We take white, red, blue and green holiday shades.

We fold the napkin several times to get a square shape, then we cut the folds and crosswise fasten the middle with a stapler.

Now we bend each layer, forming a pompom.

We lay out the first row on the frame with these balls. Then we glue the balls and other Christmas tree decorations onto double-sided tape.

And fill the entire surface of the frame with napkins.

Everything is pretty fast.

By the way, you can see how to make one from napkins here. It also turns out very beautiful.

Christmas tree made from candies

A craft made from candies would be a wonderful gift: buy a box of good candies in a beautiful package at the grocery store.

It is made of two parts - a base for candy and a barrel.

Glue the base with a side of 23 centimeters. When cutting, make indents along the bottom edge and at one edge of 1 cm. We will apply glue to them.

We decorate with beautiful paper or film. Glue the bottom to its base.

We make a trunk, decorate it and glue it to the frame.

Now we evenly place candies, braid or Christmas tree beads onto the hot glue.

Use the same color scheme for the base and candies.

Making a New Year tree from pine cones

Natural material always adds the right zest to the decor. Your home will immediately smell fresh and resinous. Will give symbolic meaning to this winter holiday.

The cones are also suitable for various crafts.

You can create a Christmas tree from only pine cones, or you can dilute them with sisal balls, decorative flowers or fir branches.
The combination of pine cones and dried citrus fruits also looks unusual.

Glue the pine cones onto the base using hot glue. You don’t have to think about the side you have them on. This will add a slight, mesmerizing carelessness to the product.

We alternate pine cones with Christmas balls or other decor.

Cover with artificial snow or white enamel from a sprayer.

Everything is quite easy, and the result is incredibly beautiful.

Light tinsel Christmas tree

We cannot imagine the New Year without tinsel! There are all sorts of decorations on it now: stars with balls, and multi-colored tips. It is used to decorate windows, curtains, walls and, of course, is used as a material for crafts: wreaths and Christmas trees.

Since most tinsel manufacturers put it on a thin wire, it easily lends itself to various bends and shapes.

A spruce tree is made from it in three minutes!

We will need:

• Tinsel
• Sheet of cardboard
• Double sided tape.

We make a cone-shaped base from cardboard and cover it with double-sided tape.

We remove the protective film from the first row and begin gluing the end of the tinsel, wrapping the frame tightly.

If you don’t have enough tinsel, then glue the end with tape, and put the next fluffy ribbon of the same color on top of it.

Fluffy beauty made of pompoms

Pom-poms have also long been loved by our craftswomen. Previously, we made a dog out of them, but now we will create a fluffy beauty.

The balls themselves can be made in two different ways: by winding 20 layers on a fork or by using two round blanks.

We will go with the second method.

Take cardboard or plastic and cut out two identical rings.

Now, having stepped back 5 centimeters from the edge of the thread, we begin to wind the yarn very tightly.

Then we cut the outer fold between the blanks.

Using the remaining thread tip, we tie the middle of the pompom so as not to lose all the threads.

Now we look for a thick wire and roll it into a spiral. Leave the base wide. We string pompoms onto it.

If the wire is not found, then we use the experience of previous products and form a triangular or conical base.

Felt Christmas tree ideas

Felt is also popular among our craftswomen. It can be used to make educational toys and Christmas tree decorations. Today I will give you a few ideas for creating a spruce tree.

From the simplest options to the complex.

Option 1. Cut out 10 Christmas trees of the same size from felt. Fold in half and glue the fold to the trunk.
We use branches, tree cuts (preferably spruce or pine).

Option 2. Cut out many identical triangles from felt.

We glue them to the frame in rows. The top triangle fits between the two bottom ones!

Option 3. Prepare 5 squares of different sizes: 9 cm, 7 cm, 5 cm, 3 cm, 1 cm.

We make five of each size.

Now we string the largest squares onto the thick one, distributing them diagonally to each other so that there are no voids.

We pass all the squares like this.

New Year's beauty made of fabric

And two more ideas for fabric beauties. The ends can be finished with a decorative stitch using a thick contrasting thread. Sew buttons or beads onto symbolic branches.

Use several fabric colors and textures. For example, take velvet on one side and linen fabric on the other.

You can also choose different designs in the same color scheme or, on the contrary, play with companion colors.

You can fill the Christmas tree with holofiber, padding polyester, or pieces left over from your creativity.

If the product is small, fill it with cotton wool.

My dears, I tried to select for you the most interesting and accessible materials for creativity. I would really like to know your opinion in the comments!

Tweet

Tell VK

In this article we will look at several options describing how to make a Christmas tree on the wall with your own hands. Today you can very stylishly decorate a room for the New Year 2018 with a Christmas tree located right on the wall. Flat Christmas trees are also relevant for us because they significantly save room space, while creating that long-awaited festive New Year's mood. Such a beauty can be made from a variety of materials, sometimes even completely unexpected ones.

Style 2018

Christmas trees made of tinsel and garlands - step-by-step description

Let's look at the step-by-step process of creating a Christmas tree on the wall with your own hands from a garland. It's quite simple, the main thing is to follow the sequence and do everything carefully. The process will not take more than 15 minutes, so if there is very little left before the guests arrive, and you are not ready, this is the best option.

Let's prepare everything you need:

• garland. Here you need a fairly long one so that it is enough for the entire contour of the Christmas tree;
• ruler and simple pencil;
• a wall with an electrical outlet nearby if you are not using a battery-powered garland;

Minimalist style will be fashionable for New Year 2018

Now let's get started:

1. Using a ruler and a simple pencil, mark the future Christmas tree on the wall. This is necessary so that the New Year's beauty turns out smooth and symmetrical.
2. Now we hang the garland. We start from the bottom on one side, go up, catching the garland by the nails. Then we go down the other side. You can make branches crosswise. We start from the bottom on one side, then we lead the garland to a branch that is slightly higher, but on the other side, and so on, at the top of the head we move to the other side and go down according to the same principle.
3. The Christmas tree is ready. Turn on the flashlights and admire. If desired, you can decorate it by attaching some Christmas tree decorations to needles or carnations. You can also fill the space inside the Christmas tree with decorations. To do this, you will need the same nails or buttons that we attach to the wall inside the Christmas tree and hang small toys on them.

Using exactly the same principle, you can make a Christmas tree on the wall with your own hands from tinsel. Only it won’t need an outlet nearby. Or you can combine tinsel and garland. In general, use your imagination, and how to implement the idea is described step by step in the article.

Video on making a Christmas tree on the wall:

Snow beauty 2018

A wonderful, magical, winter, truly New Year's tree will be made from snowflakes. Snowflakes need to be prepared by cutting them out of any paper. Next, we’ll look step by step at how to make such a Christmas tree out of snowflakes on the wall with your own hands. Let's prepare everything you need:

• prepared paper snowflakes;
• Ruler and pencil;
• double sided tape.

You can cut out snowflakes from adhesive paper, then there is no need for tape.

When everything is ready, let's proceed:

1. We will mark the wall with a pencil; here it is important to make all the branches of the tree symmetrical.
2. Now we fill the entire area of ​​the drawn Christmas tree with snowflakes. It needs to be glued onto double-sided tape, which we attach a small piece to each ray of the snowflake on the edge.

The Christmas tree made of snowflakes is ready. It’s better to leave her like this, she turned out to be self-sufficient and elegant. The same Christmas tree can be made on the window. Snowflakes can be glued to glass with plain soap and water.

Photo ideas for a wall tree for the New Year 2018:

Paper Christmas tree

A DIY Christmas tree on the wall for New Year 2018 can also be made of paper. In order to make an elegant and environmentally friendly New Year's beauty, there are several options.

Option #1

For work we need:

• green corrugated paper. You can use any other color if you wish;
• simple pencil and ruler;
• scissors;
• double-sided tape or adhesive tape.

When everything is ready, let's start creating the Christmas tree:

1. Mark the outline of the Christmas tree on the wall using a pencil and ruler.
2. We cut the rolled corrugated paper into bars, 5 centimeters wide, or wider if possible.
3. Let's unfold each piece of paper into a ruler and cut it on one side, making a fluffy fringe.
4. We unfold it to the end. We make quite a few of these fringed strips to fill the entire Christmas tree.
5. Now we start gluing it on tape or adhesive tape.
6. Glue from below. We glue each subsequent strip with an overlap.

The lower strips will have to be glued end-to-end several times, depending on the size, and the upper strips will have to be cut along the contour of the tree. The fluffy beauty is ready.

Option No. 2

For the second version of the paper Christmas tree we need:

• colored paper with a pattern;
• pencil and ruler;
• buttons or nails or suction cups;
• thread;
• scissors;
• clothespins.

We make a Christmas tree like this:

1. First, draw a triangle-shaped marking with a pencil. Mark the places on each side where the threads will be attached.
2. We install a fastening element (suction cup or buttons) in each marked place on both sides.
3. We pull the threads onto the fasteners.
4. Cut out flags, squares or circles from colored paper with a pattern.
5. We hang them on threads on clothespins.

We got a stylish modern Christmas tree. It is quite simple to make and looks bright and beautiful. You can make this Christmas tree with your children.

Option No. 3

This option is good for a summer house or for a room stylized as antique or natural Provence. You can make a Christmas tree from the pages of an old book that have already turned yellow.

Mark an even triangle on a wooden wall. Place the pages of the book on double-sided tape, filling the space of the triangle. Attach a rope around the perimeter.

Step-by-step photo tutorial on making a fringe Christmas tree:

How to make such a beauty?

Christmas tree on the wall made of threads

A wonderful New Year's beauty can be made on the wall from knitting yarn or any rope or thread. There are also many ideas for this. Let's take a step-by-step look at several master classes on how to make a Christmas tree on the wall with your own hands from threads for the New Year 2018!

Option #1

To work we need:

Let's prepare everything you need:

• threads;
• carnations or buttons, needles;
• ruler and simple pencil;
• small Christmas tree decorations, any decor that you can use to decorate our beauty if you wish.

Now let's get started:

1. Using a ruler and a simple pencil, mark the future Christmas tree on the wall. This is necessary so that the New Year's beauty turns out smooth and symmetrical. It can be a simple triangular shape or with branches marked symbolically.
2. At the top of the head, along the edges of the branches, in all corners and in the middle of the longest sections, you need to insert nails, needles or buttons into the wall.
3. Now we wrap the thread around the perimeter.
4. Then we chaotically fill the space inside the Christmas tree, winding the thread around the fasteners here and there.
5. Afterwards, you can decorate our beauty with any paper decorative elements, attaching them to clothespins anywhere on the wound rope or small New Year’s decorations.

Video:

Option No. 2

It is simpler, but no less interesting. It requires the same materials.

We do this:

• Mark the top and bottom of the tree, measuring the width.
• We insert a nail into the top of the head and insert nails or pins along the entire width along the bottom.
• We wind the thread so that the rays of the thread diverge from the top of the head to the sides down along the entire width.

Such a Christmas tree made of threads can also be decorated with multi-colored clothespins.

Cozy Christmas tree on a felt wall

A cozy felt Christmas tree on the wall is a great option for kids. This New Year's decoration is also useful for developing tactile sensations and fine motor skills. On New Year 2018, the baby will be simply happy to dress up the beauty with cozy and stylish toys.

Let's look at how to make a Christmas tree on the wall with your own hands from felt and decorations for it:

• felt in green and any other colors.
• threads with a needle. The threads can match the felt or contrast, which will create an additional decorative effect.
• buttons.
• braid or thin ribbon for eyelets.
• double sided tape.
• pencil and ruler.

We make a Christmas tree like this:

1. First, let's make markings on the wall and a pattern for the Christmas tree. They must match in size.
2. It’s better to sew the Christmas tree by machine, or you can do it by hand.
3. We sew buttons randomly to the Christmas tree.
4. We attach the tree to the wall with double-sided tape.
5. Multi-colored removable toys made from the same felt will be a wonderful addition to the Christmas tree. Now you can sew the toys according to the pattern. These could be balls, dogs, snowmen, deer, and so on. We sew a loop to each toy.

Now the baby can decorate the Christmas tree himself, hanging toys with loops on buttons.

Christmas tree made of branches

A great option for those who like to decorate a fluffy Christmas tree is a tree made of branches on the wall. It looks unusual, stylish and New Year's. Moreover, a traditional Christmas tree made from branches attached to the wall saves room space.

Stylish Christmas tree made of branches

In order to make a New Year's fluffy beauty, artificial spruce branches are better suited, but you can also take natural ones. They will need to be carefully secured to the wall using nails or tacks and double-sided adhesive tape.

The Christmas tree on the wall for the New Year 2018 can be decorated with a garland and small Christmas tree decorations. There is no need to hang a lot of decor, as the structure may not withstand the weight.

Moreover, such a Christmas tree can be made in a traditional shape, or you can make it upside down, that is, with the crown down and closer to the ceiling. This option is good for extraordinary and extravagant people, bold and stylish parties.

Here are a few more photos of Christmas trees on the wall, built with your own hands from different materials for the New Year 2018: