Ripped jeans are not a new trend. This is rather proof that fashion is cyclical. Pants with holes were first worn by hippies back in the 60s. With deliberately careless clothing, the “flower children” wanted to emphasize their protest against generally accepted rules. The trend was picked up by rock stars: in the 70s, every self-respecting rocker wore ripped jeans, thereby challenging society. Naturally, at that time, torn jeans were not sold: rebels simply wore their pants to holes and did not sew them up - that’s the whole “fashionable” secret.

Everything changed when modern designers began to look for inspiration in the informal styles of yesteryear. So, the catwalks, and then the streets, were filled with “holey” jeans.

Holes in the pants add a touch of playfulness, sexuality, and freedom to the image of the fair sex. Men's distressed jeans are associated with rebellion. The trend, which fashion critics predicted would be fleeting, has not lost ground for three seasons now, and it doesn’t seem to be going away anytime soon.

Choice of model, fabric and color

Do you want to add fashionable ripped jeans to your wardrobe? Go... no, no, not to the store, but to audit your closet. There are probably denim pants out there that you don't wear because the model is outdated or seems too boring. Or maybe you have favorite jeans that are worn out, but it was a pity to throw them away? Finally, pity for old things has justified itself: give your trousers a new life.

You can tear any pants. But your task is to arrange everything in such a way that no one suspects “independent activities.” This is only possible if you choose the “right” basis. Which jeans are better to rip?

• Model. The flight of designer imagination knows no bounds: couturiers “tear” boyfriend jeans, mom jeans, and skinny jeans. For home experiments, it is better to choose pants that are not too wide and not too narrow: in the first case, the torn areas will simply get lost, in the second, the holes will look unaesthetic.
• Textile. For the experiment, pants made of classic denim - moderately thick - are suitable. If you want to “upgrade” elastic jeggings with holes, then it’s better to abandon this idea. The result is unlikely to impress: if the base of the pants is made of elastane, you can make holes, but they will not look beautiful.
• Color. It’s better to tear up classic denim - blue or blue denim. The contrast of the threads provides a stunning effect: even old trousers will look stylish.

Have you thrown out all your old jeans and have nothing to experiment with in fashion? Stop by the nearest second-hand store and pick up some pants that you can use to make “candy.” Don't like used clothes? Then buy the simplest jeans in a regular store and turn them into trendy ones. The savings will be significant: usually torn models cost two or even three times more than those without holes.

4 ways to create a designer hole in your pants

Decide on the shape of the holes and their location. Of course, a lot depends on your imagination: don’t be afraid to show it. However, it’s worth looking for inspiration first so that you don’t end up with pants that you can only wear in the countryside, where no one can see. You can look for ideas on the Internet. After studying the star looks, you will understand what the ideal ripped jeans should be.

You can run into a couple of stores and try on the “holey” models that they sell there. A raid on boutiques will also give you an idea of ​​what your jeans should ultimately turn out to be. Don't forget that beauty lies in simplicity. Ideal - a couple of holes or one big one, a couple of worn areas. It’s ridiculous to have jeans with a hole in them or pants that reveal areas of the body that are usually hidden. In a word, don't overdo it.

Stylish holes with white threads

What you will need:

• a piece of plywood or thick cardboard;
• stationery knife or sharp blade;
• tweezers.

How to do

1. Mark future “holey” areas with chalk.
2. Lay the jeans out on a flat surface and place a cardboard or piece of plywood under the cut. This is protection against through holes.
3. Using a utility knife, make several horizontal cuts of the same size in the outlined area. They must be parallel to each other. The knife needs to be guided along the threads located transversely.
4. Using tweezers, pull out the blue threads. The white transverse ones should remain: they will beautifully cover the hole.
5. Carefully trim any white threads that are sticking out. You can cut off some of the white threads to make the gap larger.

Pumice will help hide traces of “creativity”: rub it along the edges of the cuts. To make holes look stylish, bleach the fabric around them. To do this, you can use bleach or any commercial bleach. Then wash your jeans as usual.

Sloppy holes in grunge style

What you will need:

• board or plywood;
• stationery knife.

How to do

1. Place a piece of plywood inside the leg. Make several parallel cuts with a utility knife. They should be located close to each other.
2. Carefully run a knife between the cuts, cleaning off the transverse threads and freeing the longitudinal ones.
3. Trim (or simply tear off) part of the longitudinal threads at one end to achieve the most careless effect. Grunge style jeans are ready!

Don't try to make the cuts beautiful if you want to end up with a grunge style. It’s not for nothing that this style is called a rebellion against glamor: deliberate negligence is very welcome. Jeans should look like they are torn from prolonged wear, but you don’t care about that.

Holes-fragments

What you will need:

• chalk or simple pencil;
• scissors;
• tweezers;
• comb;
• bleach.

How to do

1. Lay your jeans out on a flat surface. Mark with chalk or a pencil the fragment that will be “empty.”
2. Carefully cut out the marked piece.
3. Walk along the edge of the fragment with tweezers, removing the threads. Fluff the edges with a comb.
4. Soak a cotton pad in bleach and blot the edges of the cut piece. Wash your jeans afterwards.

“Voids” should not be placed on the knees, behind or too close to the waist. If you decide to cut a rectangle on the leg, then it is better not to make any more conspicuous holes on it, otherwise the jeans will look vulgar. But abrasions are possible.

Torn knees

What you will need:

• chalk or pencil;
• stationery knife;
• grater.

How to do

1. Put on some jeans. Mark the knee line with chalk or pencil, which will become the cut.
2. Remove the jeans and carefully make a cut along the marked line.
3. Rub the slits. Wash your jeans and the cuts will become a little frayed, creating a “just torn” effect.

If black denim trousers are gathering dust in your closet, it’s time to take them out and turn them into trendy ones - cut them in the “knee” area. This has been all the rage for several seasons in a row. It’s not just women’s trousers that are being upgraded with neat holes at the knees: guys also like this trend.

Create a worn effect

Ripped jeans are an option for bold fashionistas and fashionistas. Even a calm image with holey pants carries a daring message. If you are not ready to “rebel”, but also do not want to lag behind fashion, try a less flashy (but no less stylish) version of the “upgrade” - wash your jeans. Scuffs are not as noticeable as holes, but this is how you can turn old or simply boring trousers into trendy ones. All you need is sandpaper or pumice, and a “backing” so as not to rub your pants through. Follow these four steps.

1. Get wet. You need to wet the areas where the abrasions will be located with water. This will enhance the effect.
2. Install the backing. Place a piece of plywood, a board or thick cardboard between the two parts of the trouser leg.
3. Rub with pumice or sandpaper. Until you get the desired result.
4. Wash your pants. And wear them for a couple of days in a row - the effect will intensify.

If the denim is too thick, then pumice will help “age” the jeans. Take the most common one. You will have to work longer with sandpaper, but the result cannot be distinguished from factory abrasions. It is better to use fine-grained sandpaper and not overdo it if holes in your pants are not part of your plans.

3 more trending ideas

Although torn and frayed jeans have been at the peak of popularity for several seasons, trends are changing. Do you want to keep up with the fashion world? Complement ripped pants with trendy elements.

• Make a fringe. A disheveled bottom coupled with holes in jeans is a new trend that has resonated with fashionistas. It’s easy to copy the trend at home: you need to rip off the hem of your trousers with a blade and pull out the transverse threads with a needle. This is how you can transform old denim shorts: nothing complicated, but it looks fresh.
• Decorate the holes with lace. Have you been dreaming of ripped jeans for a long time, but still don’t dare to bare your knees? Feel free to rip out your old pants! Large holes can be covered with lace - stylish and sexy. You can alternate “naked” holes and “lace” ones, make scuffs and fringes. The main thing is not to overdo it: everything will immediately look out of place.
• Wear fishnet tights under ripped jeans. This trend clearly shows how changeable everything is in the fashion world. Until recently, “fishing nets” on the legs were considered vulgar and a sign of bad taste, but as soon as models wore fishnet tights under torn jeans, everyone around them lost their heads from such a decision. Do you want to be known as a real fashionista? Punch big holes in your jeans, put on some mesh, and voila! The only condition: you don’t need to make a lot of holes, otherwise it will be difficult to get rid of the notes of vulgarity in the image. Make one or two big rips, pull the tights over your waist so they peek out from under your jeans - your stylish look is ready!

Transforming trousers is actually not difficult. It is much more difficult to correctly combine torn pants with clothes and shoes. It is believed that holey models can be worn with anything (with pumps and a jacket, with plain T-shirts and loafers, with a vest and white sneakers), but on some they look stylish, on others they look ridiculous. Show your imagination, be inspired by the looks of stars, pay attention to street fashionistas - and you will be able to harmoniously fit ripped jeans into your wardrobe.

Times change, years fly, fashion changes... Only torn jeans continue their victorious existence, sparing no one: torn jeans are loved by both women and men, and show business stars, and business people, schoolgirls and students.

“Ripped jeans” are loved by all models: classics, flares, bananas, boyfriends...

The older the jeans look, the more fashionable they are! Even the most expensive brands have found ripped jeans. Jeans are offered to be torn and made to order! “Master of Handicrafts” will save your money and teach you how to “aging” jeans with your own hands.

How to rip a fashion item so that it looks factory beautiful? How to make it shabby? How else can you customize this wardrobe item? Here you will find the most interesting ideas and, of course, master classes.

How to make holes in jeans

How often do your clothes become obsolete? Is the model outdated, torn, or just tired? Give your jeans a second chance, give them a second life!

We would like to note:

• Blue or blue denim jeans are most suitable for “execution”; they will look more impressive
• The silhouette should not be too tight, but not completely loose.
• Read the ingredients, if it contains a word like “elastane”, you won’t be able to tear them.

In order to beautifully “perforate” jeans, we will need the following materials:

• Stationery knife
• Wooden plank (place under the knife)
• Nail scissors
• Tweezers
• Needle or pin
• Pumice stone, nail file, sandpaper
• Soap

Stage 1:

Mark the areas you will be working on with soap.

Adviсe:

• If you are not a super model in terms of body composition, do not experiment with cuts on the loin, consider the holes at the knees, a little higher or a little lower.
• Narrow and elongated slits along the central part will slim your legs
• Wide holes below the pockets will make the hips wider.

If you mess up your trouser cutting technique, you'll ruin your jeans, so start with a small cut and increase it later if necessary.

Stage 2:

So, first we mark where the holes will be. Then lay the jeans out on a flat surface. Place a board under the cut to avoid cutting through the entire pant leg. Make a neat cut with a knife. We cut horizontally along the transverse threads.

If you need a small hole, quietly use tweezers to release the light threads, and use a brush to remove the blue threads, cutting off the longest ones.

3. Take out the blue threads and leave the white ones to get these jeans.

After you finish your work, wash your trousers in the washing machine, they will put an end to your creative mess.

Ripped jeans at home

So, there is a second way to get blue threads out of boring trousers.

We make cuts with scissors or a knife, pull out the blue threads with tweezers, leaving the white ones.

Cut off any excess long white threads.

How to rip jeans at the knees

If you want to get a hole on your knees with white threads, then read the previous paragraph.

How to get a big hole in your knees? As easy as pie:

• Mark the cuts
• Cut with scissors and pinch them a little with tweezers.
• Wear until the holes themselves become huge and worn out from wear.

How to make distressed jeans

If you want to get distressed denim, arm yourself with a nail file, pumice stone or sandpaper and start rubbing and rubbing and rubbing. Sometimes even a grater comes into play!

DIY jeans with patches

Why don't you diversify your clothes with different kinds of patches?

A lace patch looks very impressive.

How to make a patch on jeans video

Text prepared by: Veronica

For many seasons in a row, ripped jeans have occupied a leading position in the world of fashionable clothing. They are equally in demand among both women and men of different age categories. This type of clothing is especially popular among teenagers. Despite the fact that such jeans are not cheap, many fashionistas and fashionistas are eager to purchase them. And some people, having heard that they can remake their jeans without any effort by tearing them in some places, have irrevocably ruined their clothes.

The thing is that without knowing some of the subtleties and using special tools, you cannot cope with this task. In this article you can get complete information on how to properly rip jeans at the knees and not ruin them, but, on the contrary, turn them into a fashionable designer item.

Big and small

Before you start altering your jeans, you need to decide for yourself exactly what size knee holes you want. The fact is that there are several types of such processing. Conventionally, they can be divided into the following:

• which completely open the knees;
• small and narrow, visible only when walking;
• holes draped with threads.

In addition to jeans with holes that reveal naked areas of the legs, there are also those that hide stripes from other fabrics under the holes. Such items are especially popular with guipure fabrics or materials with colorful patterns.

But do not forget that no matter what type of holes you choose to improve your favorite outfit, you need to know when to stop in this matter. Otherwise, there is a possibility of overdoing it and getting a clown outfit instead of fashionable jeans. The information provided in the article on how to tear jeans at the knees will help prevent a lot of mistakes and prevent you from becoming an object of ridicule.

Making holes in your favorite pants is a delicate matter and requires taking into account some rules:

1. You should never make cuts by eye; it is best to do a preliminary fitting and apply marks at the location of the future cut.
2. Use chalk or soap to mark fabric.
3. The area on the knees is particularly susceptible to stretching; this nuance must be taken into account when creating an incision of the required size.
4. You should not use scissors, as they do not allow you to make straight lines. It is best to use a stationery knife.
5. You only need to make cuts when using a backing board. Without it, you can cut right through your jeans with a utility knife.

Knowing how to beautifully rip jeans at the knees and applying these valuable tips, you can transform your outfit without any help.

Which jeans are better?

When planning to decorate their own or recently acquired ones with the help of rips, many fashionistas forget to take into account some nuances:

1. Ripped jeans at the knees do not suit all body types. If a girl has a slim figure and is tall, then she can, in principle, wear jeans with rips in different places. But for plump people with curvaceous figures and short stature, it is better to give preference to this item with small vertical tears above the knee.
2. Before you make torn knees on jeans, you need to know the characteristics of the material from which they are made. Although many people think that any jeans with ripped knees look cool, this is actually not the case. The best pants for this are those made using classic mid-weight denim.
3. And finally, I would like to mention the style most suitable for such decisions. A trouser cut that is too wide will not allow the full beauty of ripped jeans to be revealed, as the holes in them will look awkward. There is also no need to carry out such manipulations with very narrow models, because the fabric on them will be deformed, which will ruin the original appearance of the outfit. Tight-fitting jeans are considered the most suitable for creating holes in the knees.

Bare Knees

Having studied the information about the correct choice of suitable jeans for their further transformation, we proceed to the most important point - the formation of holes.

Let's look at the most popular type, which allows you to fully open your knees. So let's get started:

1. Put on your jeans and, using a piece of chalk or a bar of soap, draw one oval on each leg at the knees. The oval should be depicted in such a way that when cutting it out, the knees open completely.
2. Look in the mirror and, if the drawings are satisfactory, proceed to the next steps; if not, then you should redraw them.
3. Remove your pants and place them on a flat surface.
4. Place a board inside the jeans, under the drawn oval.
5. Cut out the design using a utility knife.
6. Do the same steps with the second pant leg.
7. The edges of the hole need to be ruffled a little using a fine grater.
8. And using a needle, disconnect several outer threads, after which you will get a beautiful fringe that will border the holes in the knees.

There is no need to try to make the holes in the knees identical. It's best if they are slightly different. The slight carelessness of the image obtained when using this method allows you to give the wearer of these jeans lightness, freedom and sexuality. Knowing how to tear jeans at the knees by drawing ovals, you can improve this method a little by changing the contours of the drawing. Thus, it is possible to depict various designs on the surface of the trousers.

Narrow strip

This method involves creating narrow holes in the knees. Many people like these ripped jeans because they look more restrained than the previous option. They are preferred by people who want to liberate themselves, but are not yet ready for very big transformations.

It's very easy to make narrow slits on jeans in the knee area that would only be visible when walking. Let's look at how to tear jeans at the knees using this method in more detail.

1. Put on your jeans and use chalk to draw one thin strip down the center of your kneecap, on both legs.
2. Make sure the work is done correctly.
3. Take off your pants and place them on the table.
4. Place a board inside the jeans, under the drawn line.
5. Cut the line with a sharp utility knife.
6. Do the same with the second pant leg.
7. Make a small fringe around the edges of the cut using a needle or fine grater.

As can be seen from the listed actions, working with creating different types of holes on trousers has similarities. Therefore, you can easily make several jeans for yourself with different types of holes.

Thin cobweb

Making holes in the knees so that they are covered with thin threads is not a difficult task, although, at first glance, it seems otherwise. Guided by certain rules for the manufacture of such parts, you can create a thin web on your trousers quite quickly. Let's look at how to rip jeans at the knees beautifully at home, with a step-by-step guide:

1. On both legs, in the knee area, draw several transverse lines of varying lengths.
2. Place a board inside each pant leg under the drawn lines.
3. Use a sharp utility knife to make cuts along the drawn lines.
4. On each resulting strip, use a needle or tweezers to pull out the blue threads, leaving the white ones intact.

If you wish, you can make not a full web on your jeans, but only a few alternating stripes.

Which color is better?

Current fashion has made it possible to have not only blue or light blue jeans, but also any other shade. In this regard, many people have a question about whether the color of trousers is decisive when making holes in them.

There are some points to note. Actually, it doesn’t really affect the appearance of the holes made on them. Another thing is that colored trousers are sometimes not jeans at all, but are only called that by their owners out of habit. To form a beautiful flaw on trousers, the density and structure of the fabric are important, and therefore material with thin fibers will not be suitable.

When it comes to colored mid-weight jeans, small slits at the knees with minimal fringing and minor fraying will look great on them.

Also, some are concerned about the question of how to tear black jeans at the knees. In fact, making beautiful holes on black trousers is no different from similar work with blue or light blue ones.

Jeans for macho

Although there are much fewer men who prefer to wear ripped jeans than women, nevertheless, many representatives of the stronger sex consider this outfit the most stylish. Men's jeans with holes in the knees and other places can make their owner visually more masculine and brutal. To achieve this result, you need to use the same techniques as when making holes in women's trousers.

Before going on your knees, it would be nice to think through the entire image of the trousers. For representatives of the stronger sex, you can make the edges of the holes rougher. It's also worth adding more frays to the jeans. This can be done quite simply by using sandpaper.

Any man, knowing how to rip jeans at the knees correctly and beautifully, can do it without any help. But creating fashionable ripped jeans is only half the job, because to make them look really cool, you need to be able to combine them correctly with other things.

Ripped jeans are back at the peak of popularity! With their help you can become not only daring, but also romantic beauty! The main thing is to choose the right design and the right holes. On the shelves of fashionable shopping centers you will find hundreds of stylish models. But if they aren't to your taste, don't despair! You can always make super trendy ripped jeans yourself. And this material will help you!

How to make your own ripped jeans at home

If you have old or new jeans that you want to transform, that's great. This handicraft will not take much time, but the future new thing will definitely be unique and non-standard. It's not that difficult to make ripped jeans at home. but at the same time there are many schemes and technologies. You don’t have to take cutting and sewing courses, but you need to stock up on patience, tools, and imagination.

Tools that will be needed during the work

To transform unsightly jeans and make scuffs on them, you need to prepare holes:
👖jeans (it is allowed to take pants from a different material, but the technology for processing them is slightly different);
👖 scissors (preferably for fabric - large, sharp);
👖a small grater, razor, nail file or sandpaper (if abrasions are expected in addition to holes);
👖a stationery knife or blade (it is acceptable to replace this tool with regular nail scissors, but you will have to be more careful when working with jeans);
👖 additional pieces of fabric, lace (if beautiful feminine decor is expected and sewing it under a large hole as an internal patch);
👖chalk, pencil or pen (to mark the places of future holes in jeans);
👖a needle or ripper (will help pull out unnecessary threads);
👖tweezers or vacuum cleaner (to quickly remove excess threads);
👖small sewing needles or paper clips (for fixing patches on jeans).

Scheme

At the beginning determine the places in which holes and slits will be made. Analyze denim textile trousers If it is worn out, then the holes should be small and in those parts where bends are not expected (above or below the knees, on the back pockets of each pant leg). If the material is new and is not bursting at the seams, then the shape, placement, and size of the holes can be any. In the first option, they will be easy to do, and you can even pull out the threads by hand, but in the second case, you will definitely need a fabric ripper.

To outline future locations for holes, try on your jeans and start with the places where the bends, knees, and buttocks end. When you take off your pants, these marks will help you accurately determine where the holes and abrasions should be. Draw their full circle, not just a point. If the hole is of irregular shape, it is better to place it so that the largest diameter falls on the shared thread (it stretches less). Some types of sewing chalk are not washable, so a small bar of soap is a better solution.

How to tear jeans beautifully with your own hands: execution techniques

Sloppy holes in grunge style are very simple to make.
👖In the selected location, strips of different lengths are cut parallel to each other at a distance of 5 mm.
👖The transverse threads are pulled out and removed. If some of the grain threads are damaged, this will add sophistication to the trousers, but in no case will ruin them.
Ripped jeans in a minimalist style. For such trousers you will have to mark several places with small holes. The main task is not to damage the transverse threads, but to remove some of the side threads so that they do not stick out very colorfully. Such holes are often made in the size of 2 cm by 4 cm and are placed closer to the side seams of the jeans.
👖Shabby holes on trousers are used very often, especially when it comes to large hole diameters. This effect can be easily achieved using a simple kitchen grater, sandpaper or pumice stone for the feet. The main thing in this matter is not to touch the threads that remain transverse or lobar, so that the jeans last for more than one month, a year, and the fringe does not tear after the first wash.

How to make a scuff using a grater

Ordinary kitchen utensils often come to the rescue in handicrafts. To make a hole in your jeans look old and shabby, you will need a simple grater or piece of sandpaper. Draw tightly along the edge of the hole with small jerks with the selected tool so that the threads fluff up. Carry out similar actions with each edge of the denim hole. You can do the work both from the front side and from the back. After this, additionally bleach the threads with a chlorinated solution.
Note, The reverse side of jeans often looks more original than the front side. If there are additional pieces of such fabric Try making this patch on the front of your trousers. You can sew the patch with large stitches so that the threads are visible. Such an addition would be quite appropriate for both men’s and women’s clothing. You can create a pattern from pieces of other fabric (optional). Improve your jeans so that they can complement both a romantic, feminine look and a sporty, daring one.

Bleached holes

To make your denim look even more stylish, try bleaching some threads and areas. The easiest way to do this is with a chlorinated solution or other bleach. Dissolve ordinary chlorine in a small amount of water, apply the solution to a small piece of cotton wool or gauze and treat the necessary areas with holes. Chlorine eats into the fabric, and whiteness may not appear immediately, but after some time. Therefore, after treatment, wash your jeans immediately, this way the excess chemical will be removed and the holes will remain in excellent shape for a long time.

When bleaching holes in jeans, it is important to carry out all work with rubber gloves and in the open air. It is advisable to test bleaching on a small piece of the same fabric or on an invisible part of the trousers (under the knees, on the wrong side). If you want to decorate your jeans with white drops, then using a pipette apply chlorine solution to the cloth, and place a layer of cotton wool underneath. Once the chlorine is absorbed, it needs to interact with the fabric for about 1 hour, after which the clothing will need to be washed completely.

How to make shorts or breeches from regular jeans

An easy way to update old jeans is to cut them down to shorts or breeches. In this case, you need to outline the height of the future product and break it along the transverse thread. If the shorts are intended to be made without further processing, but with torn edges, then no allowances will be required. They are necessary if, according to the model, a gate is required. For this design, add 3-7 cm to the desired length and trim off the excess. This process will look like this step by step:

✂Without folds, lay out the finished jeans on a flat surface.
✂Mark with chalk or pencil the place where the excess length will be trimmed.
✂Tear off the jeans along the line with your hands or with scissors.
✂Additionally, we make holes or scuffs (optional), taking into account that the color of the longitudinal thread will be lighter than the main shade of the trousers.
✂Tuck the edge or leave it torn. Ready!

Photo of beautiful ripped jeans

Every modern girl will definitely have several pairs of jeans in her wardrobe. As a rule, some of them are out of fashion, others are fairly worn, but between them there will definitely be some once favorite trousers that you don’t want to part with at all. But don’t despair, throw away your jeans, or hide them far away in the closet; you can try to give them “new life” back. To do this you will need desire, a little imagination, simple devices, accuracy, and our advice. Absolutely right - we will talk about ripped jeans, which are not a new fashion item, and have been popular among teenagers, glamorous women, students, and movie stars for many years. Of course, you can buy ripped jeans, but their cost remains somewhat exorbitant, especially when it comes to branded ripped jeans from famous fashion designers. Such jeans can be purchased at a low price, but not all women like the incubator resemblance. Therefore, the best option to get new and stylish jeans is to make them yourself at home without spending a lot of time and money.

Ripped jeans aren't exactly new; they've been around since the '80s, but they've become more popular than ever lately.

To bring your creative idea to life and make your jeans beautiful, fashionable and stylish you will need:

• Jeans. It should be noted that not all jeans are suitable for this procedure. For example, insulated jeans with fleece will look ugly, and too thin ones will quickly unravel. So, a good option would be jeans of medium weight and thickness s. In addition, jeans should not be too narrow or wide. On wide trousers, the flaw will be almost invisible and dangle in different directions, but on too narrow trousers, it will quickly spread out.

• Stationery or tailor's knife.
• Pumice, sandpaper, or stone for sharpening knives.
• Bleach or bleach;
• Chalk or soap;
• Manicure scissors, a thick needle or a stiff clothes brush.
• A metal or wooden plate that needs to be placed inside the trousers so as not to damage the working surface or the other side of the jeans.

In the process of resuscitating jeans, you will not need all the accessories, but only those that are necessary for the method you have chosen.

3 ways to rip jeans

Before making ripped jeans, you need to decide on the size, quantity, location of holes and abrasions. You need to make cuts in places where they will look good, because on the buttocks or the knees themselves it looks a little ridiculous. There are several ways to rip jeans, but let's look at the simplest and most popular ones.

1st way to rip jeans:

• First, you need to lay the jeans out on a hard surface and mark with chalk or soap the areas where you will make frays or holes.

• You need to place something hard under the place where you will “tear” the hole so as not to damage the furniture. Then you start cutting a hole across the leg with a regular stationery knife. There is no need to make sudden movements; the denim should tear gradually. Make a fairly large number of cuts so that individual threads begin to stand out. Then you need clean the fringe from dust and small threads. After the necessary cuts are made and the trousers are ready, they need to be washed so they will look natural.

2nd way to rip jeans:

• Jeans can be placed on a flat surface or worn on yourself
• Take a pumice stone, wire brush or sandpaper and start rubbing the jeans in the places where you want to get frays or tears. You need to rub the jeans until the holes spread out. It looks beautiful if the abrasions and holes are made evenly.

• Holes on jeans will look very good if the fabric around the hole is slightly bleached. To do this you need to use bleach or bleach. They need to be applied to the desired areas, and then wipe the trousers.

• After getting holes, you need to wash your trousers.

3rd way to rip jeans:

1. To make jeans with a lot of terry, which is now in fashion, you need to use a thick needle or nail scissors. First, you need to take chalk and highlight areas that will choke on the torn, then cut out cuts and carefully, using a thick needle or nail scissors, pick out threads from the fabric, but only in the place where there will be holes.

• After finishing the procedure of tearing the jeans, they need to be washed or tousled with a brush, then the holes will look more disheveled.
• You can decorate your jeans and hide bare areas of your legs by darning a patch of leather or guipure in place of the holes.

If you finished the job and were satisfied, it means you did everything right and you have new exclusive jeans in your wardrobe.

• Before tearing your jeans, be sure to try them on and decide where the cuts or frays will be.
• Slits above or below the knee make the legs look longer, while slits at the hips add extra fullness.
• If you want to decorate your trousers with lace or other material, you need to turn the jeans inside out and sew on the openwork fabric. Black lace fabric goes well with dark jeans, and white or gray with light jeans.
• Small abrasions can be made if the areas you need are moistened with water.
• If your jeans have a lot of fringe, they should be washed by hand or in a washing machine on low speed.

If you are still not sure that you will be able to rip your jeans beautifully, you can watch the video tutorial. What you see is sometimes better perceived.