Before you start knitting a scarf for a child, you need to understand how to choose the right materials and tools.

How to choose tools and materials

All children's scarves are mainly used to warm the baby during the cold season, which means the thread from which the scarf will be knitted must be quite voluminous and warm. But do not forget that the child’s skin is very delicate, and the thread needs to be soft, non-prickly and hypoallergenic.

It is good that the composition of such yarn does not exceed 40–50% wool; if possible, acrylic and bamboo are present. The length of the thread in a skein can be no more than 350 m per 100 g. The knitting needles on which the children's scarf will be knitted must be selected depending on the volume of yarn: knitting needles must be taken 2 times thicker than the thread. So, for example, for yarn with a length of 350 m, the recommended needle size is 2.5 - 4.

But, if the knitting is too tight, you need to take larger knitting needles, and vice versa, if the knitting is too loose, the knitting needles will be smaller.

Typically, the required knitting needle size is indicated on the yarn package. The size of the scarf will depend on the age and height of the child for whom the product will be knitted. To determine the number of loops that will need to be cast on for the required size, it is advisable to knit a scarf sample measuring approximately 10x10 cm.

How to knit a simple classic scarf: step-by-step instructions

Few beginning craftsmen know how to knit a scarf for a child. There are two simplest classic options that everyone can do, even beginner knitters: garter stitch and English rib. Both patterns allow you to get a double-sided fabric, that is, the front and back sides of the children's scarf will look the same.

Garter stitch involves knitting in turning rows with knit stitches, in the round: odd rows are knit, even rows are purl. To prevent the fabric from stretching while working in turning rows, the first loop is always removed unknitted, the last one is knitted purl-wise. A scarf knitted with this pattern will be quite voluminous, but not very soft.

You can diversify the product with bright multi-colored yarn.

The technique of knitting with an English elastic band should be used after having already mastered the basics of knitting on knitting needles because when making such an elastic band, knit and purl loops will be used. The scarf will be both voluminous and very soft.

Step-by-step instruction:

• On the knitting needles you need to cast on a number of stitches that is a multiple of 3 plus 2 edge stitches.
• The first loop is removed, the last one is knitted.
• In the 1st row, the loop that goes behind the edge is tied with the front one, a yarn over is made, the next one is removed. This repetition must be performed until the end of the row.
• In the 2nd row: the first one is removed, then the loop is knitted together with the knit yarn over, the next loop is re-knitted without being knitted. Alternation must be performed until the end of the row.
• Perform this repetition of the first and second row until the required length of the scarf is reached. Upon completion of knitting, close the loops, cut the thread and hide the remaining tip with a crochet hook.

Original scarf-loop for a boy

Many mothers are interested in how to knit a scarf for their beloved child so that it is warm and easy to use. An option such as a loop scarf, which will fit tightly around the boy’s neck, will not come undone and will warm him in cold weather, will help solve these problems. For such a scarf you need a skein of bulky warm yarn (wool no more than 40%), needles No. 4 and a knitting pin.

Step-by-step instruction:

1. You need to cast on an even number of stitches on the knitting needles, which is a multiple of 4, in accordance with the selected scarf width. Knitting is done with a 2×2 rib, the first stitch is always removed, the last one is always knitted purlwise.
2. In the 1st and all subsequent rows, starting from the second loop, alternate 2 knit and 2 purl stitches until the end of the row. Knit to a height of 10-15 cm.
3. Next, the product needs to be divided into 2 equal parts to make a loop: it is recommended to transfer the first half of the loops onto a knitting needle, and the second half onto a pin. Knit the first part of the loops placed on the knitting needle. Continue knitting with 2×2 rib. Having knitted to a height equal to the width of the scarf minus 2 cm, slip the loops from the pin onto a free knitting needle, and the loops from the knitting needle onto a pin. Using the free second tip of the thread in the skein, knit the second half of the loops to a height equal to the number of knitted rows on the first half of the scarf, cut the thread
4. Remove all the loops onto one free knitting needle in such a way that first the loops are thrown from the pin, and then the loops from the second knitting needle. Continue knitting for the required length of the scarf, which will be equal to the circumference of the child’s neck, plus a few cm for the volume of outerwear, plus a length equal to the length of the already knitted part.
5. Close the loops, cut the thread, hide the end. You can decorate the scarf with pompoms or tassels.

Collar scarf in the shape of a bow for girls

A bow-shaped collar scarf for a girl is a more complicated version of a loop scarf.

To knit such a scarf for a child you will need:

• a description of how to knit a scarf;
• a skein of warm and voluminous yarn, which contains 40% wool, 40% acrylic and 20% bamboo, thread length 350 m;
• a set of two straight knitting needles No. 3 and a set of 2 straight knitting needles No. 2;
• large knitting pin.

The length of the scarf will be equal to the circumference of the child’s neck + 5-7 cm for the thickness of the clothing if the scarf is worn over it. The scarf will be made using the garter stitch technique, the loops are knitted on the front wall, the yarn overs are knitted on the back wall.

Step-by-step instruction:

1. Cast on 4 stitches on needles No. 3.
2. In the 1st row, the 1st stitch is removed, a yarn over is made, the next 2 stitches are knitted, a yarn over is made and the last loop is knitted purl.
3. In the 2nd row, the first loop is removed again, the second (yarn over) is knitted, the next 2 are knitted, then the yarn over is knitted with a knit stitch and the last one is knitted with a purl stitch.
4. Then you need to make an increase in each odd row in the same way as the first row: yarn over after and before the edge loop. Increase to the desired width of the ball.
5. Each subsequent purl row is knitted similarly to the second row, no increase is performed.
6. Then you need to perform garter stitch without changes to a height of 7 - 10 cm.
7. Next, proceed to the formation of the loop itself. It is recommended to knit it on needles No. 2 to make it more elastic. To make a loop, you will need to take knitting needle No. 2 and a pin and remove the loops on them one by one from knitting needle No. 3 (the first loop is removed onto the knitting needle), thus dividing them into two equal parts.
8. Knit the first part of the loops from the needle in garter stitch to a height of 5 cm. Then slip the loops from the pin onto the second needle No. 2, and transfer the knitted loops from the first needle No. 2 onto the pin. Knit the loops removed from the pin to a height of 5 cm, using the second end of the thread in the skein for work. When the required height is reached, cut the thread. Alternately removing the loops from knitting needle No. 2 and from the pin, transfer them all to knitting needle No. 3. Knit in garter stitch on needles No. 3 to the required length of the scarf.
9. Proceed to knitting the second loop in the same way as the recommendations described above, that is, dividing the fabric into two equal parts, alternately removing the loops on a No. 2 knitting needle and a pin. Also make the second loop to a height of 5 cm. Next, connect the fabric together.
10. Work in garter stitch to a height of 7–10 cm (the number of rows is equal to the number knitted in step 6).
11. Next comes the decrease in stitches. In each front row, every 2 and 3 stitches are knitted into one from the beginning and from the end of the row. The purl row is knitted without decreasing with knit stitches.
12. Finish knitting as soon as there are 4 loops on the knitting needle. Cut the thread and hide the loose ends.

Universal scarf

Before you start making such a scarf for your baby, it is recommended to decide on its size and color. The size of the scarf will depend entirely on the wishes of the craftswoman. To create it you will need 2 skeins of yarn of different colors, containing 40% wool, 20% bamboo and 40% acrylic, thread length 350 m per 100 g), knitting needles No. 3.

The easiest way to knit a scarf for a child is to use garter stitch (all stitches are knitted).

Step-by-step instruction:

1. Before starting work, it is recommended to make a small test sample, wash and dry it, so as not to bandage the finished product later.
2. It is recommended to cast on 3 stitches on the knitting needles and knit in turning rows with the front stitches, with the exception of the edge stitches: the first one is always removed, the last one is done purl-wise.
3. The increase in loops will be carried out in each 4th row, 1 loop before the last edge loop: the first 3 rows are knitted without changes, in the fourth row 2 knit loops are knitted into the third loop - one behind the back wall, the other behind the front. Next, the next 3 rows are knitted without increasing; in the eighth row, 2 knit stitches are again knitted into the penultimate loop - behind the back and behind the front wall of the loop of the previous row.
4. The increase is carried out until the desired width of the scarf is reached. After completing the last decrease, you must also knit 3 rows, in the second, switch to a thread of a different color. Next comes a decrease.
5. The first loop in the row is removed, then the remaining loops are knitted except for the penultimate 2 loops. They are knitted in one knit stitch behind the front wall, followed by an edge purl stitch.
6. Repeat decreasing every fourth row until there are 3 stitches on the needle. Finish knitting, cut the thread, hide the end of the thread.

The scarf is ready. It can be additionally decorated with multi-colored pompoms or tassels.

Checkered scarf

A scarf with a checkerboard pattern is knitted very simply, and it turns out to be double-sided, that is, both the front and back sides look the same.

To create such a scarf you need:

Step-by-step instruction:

1. Cast on 30 stitches + 4 edge stitches on the knitting needles. Knit in turning rows.
2. Edge stitches: the first is removed, the second is always the front one behind the front wall, the penultimate one is removed, with the thread passing before work, the last one is the back side behind the front wall.
3. Main drawing:

• 1st row - alternating 6 knits behind the front wall, 6 purls behind the back until the end of the row.
• 2nd, 4th, 6th row: 6 loops are made purl behind the front wall, 6 - knit behind the back to the end of the row.
• In the 3rd and 5th row: alternate 6 knits behind the back wall, 6 purls behind the front until the end of the row.
• 7th row: it is necessary to change the arrangement of the squares, that is, over the front loops, purl ones are knitted behind the back wall, over the purl ones, knit ones are knitted behind the front wall.
• Next, knit five more rows over the knit stitches behind the back wall, over the purl rows - purl over the front wall.
• 13th row – change the squares again. Knit to the required length of the scarf. Close the loops

1. If desired, the scarf can be decorated with tassels:

• Wrap the thread from which the scarf was knitted 33 times around the narrow side of the cardboard. Cut the threads on the cardboard in half, so that the result is 33 threads 20 cm long.
• Take your hook and thread it through the first cast-on loop. Fold the thread in half and pull out a small loop with a crochet hook. Pull the remaining tip of the thread into the resulting loop. The brush is ready. Repeat for the remaining 32 stitches. Using a hook, pull the tip of the thread that remains during the knitting process into the edge loop and fasten. This will make 34 tassels.
• Make tassels for the other edge of the scarf in the same way.

Scarf with voluminous braids

For beginning craftswomen who want to knit a scarf for their child, a scarf with voluminous braids is an option for how to very quickly knit an interesting, warm and uncomplicated version of a children's scarf.

In order to knit such a scarf, you will need a skein of bright yarn, which includes wool, preferably soft and non-prickly (the length of the thread in a skein is 350 m), straight needles No. 3 and a knitting pin, which will be needed to form braids.

Step-by-step instruction:

1. The scarf with braids is knitted in turning rows. You will need to cast on 39 stitches on the knitting needles.
2. First row: the first loop is removed, it is not knitted, then 12 knit stitches are made behind the back wall, then a pearl pattern follows, that is, for 13 loops, 1 purl and 1 knit stitch alternate, the row ends with twelve knit stitches and 1 purl - edge loop .
3. The second row and all the following even rows: the first loop is removed, 12 purl loops are knitted, then a pearl pattern of 13 loops - alternating purl and knit stitches (start alternating in the same way as in the first row, from the purl loop), then 13 purl stitches, including the last edge. The series is completed.
4. In the third row, the formation of the braid begins: the first loop is removed, 4 knit stitches are knitted, the next 4 loops are re-pinned before knitting, another 4 knit stitches are knitted, then the loops from the pin are returned to the knitting needle and also knitted. Then comes the pearl pattern on 13 loops and another braid is formed: just like at the beginning of the row, 4 knit stitches are knitted, the next 4 are re-knitted onto a pin in front of the knitting, the remaining 5 loops are knitted, including the edge one, with knit stitches, the loops are returned to the knitting needle with pins and knit - 3 knit stitches, and 1 last stitch is knitted.
5. The fourth and sixth rows are knitted similarly to the second; the fifth is similar to the first.
6. In the seventh row, 5 stitches are transferred to the pin at work, the next 4 are made with knit stitches, then the loops from the pin are also knitted with knit stitches, another 4 knit stitches are knitted, followed by a pearl pattern of 13 stitches. Next, 4 loops are removed onto a pin, the next 4 are knitted, the next 4 loops are knitted from the pin, and the last 4 loops are knitted with knits and 1 edge loop is knitted with a purl. The series is completed.
7. The eighth row is performed similarly to the second. Next, the repeat, consisting of the first eight rows, is repeated to the desired height.
8. When the length of the work reaches the desired height, it is necessary to close the loops, cut the thread, and hide the end. The scarf can be decorated with tassels.

Gathered scarf

In the process of knitting such a scarf, you will need 1 skein of bright, warm, voluminous and non-sharp yarn (length of thread in a skein is 350 m, composition: 40% wool, 40% acrylic and 20% bamboo), 2 sets of knitting needles: No. 2 and No. 5.

Step-by-step instruction:

1. On needles No. 2, cast on 22 stitches, including 2 edge stitches.
2. From the 1st to the 4th row inclusive, knit in garter stitch (knit and purl rows are knitted exclusively with knit stitches behind the front wall).
3. In the 5th row, switch to needles No. 5. The first loop is knitted behind the front wall. In the remaining loops, except for the last edge loop, 2 facial loops are knitted: the first for the front wall, the second for the back, thus, the number of loops increases almost 2 times, there are 42 loops. The last stitch is also knitted behind the front wall.
4. From the 6th to the 12th row inclusive, knit in stockinette stitch on needles No. 5, that is, purl rows are made with purl stitches, and knit stitches with knit stitches.
5. In the 13th row, you need to switch to needles No. 2 and reduce the number of loops to the original: the first loop is a knit stitch, then every 2 loops are knitted into one knit behind the back wall, the last one is a knit stitch.
6. From the 14th to the 18th row inclusive, work in garter stitch.
7. Repeat the repeat from the 5th to the 18th row until the required length of the scarf. Then finish knitting - close the loops.

Warm snood collar

A seamless warm snood collar with a rice pattern is the simplest example of how you can quickly and beautifully knit a warm and cozy scarf for the winter for your child. To create it you will need a skein of yarn 240 m long, 100 g (50% wool and 50% acrylic), circular knitting needles No. 3, and a knitting marker.

To determine the required size, you need to measure the volume of the child’s head: along the bottom of the chin, going around the face along the line of the crown.

Before starting work, knit a sample measuring 10x10 cm, wash, dry, calculate and cast on the needles the required number of loops, which will be a multiple of 2 and 1 additional loop to close the knitting in a circle. Knitting in a ring. Place a marker between the beginning and end of the row.

Step-by-step instruction:

• 1st row: alternate until the end of the row: 1 knit stitch, 1 purl stitch. The row begins with a knit stitch and ends with a purl stitch.
• The 2nd row is knitted similarly to the first.
• 3rd row: alternating 1 purl and 1 knit. The row starts with a purl stitch and ends with a knit stitch.
• The 4th row is performed similarly to the third.

Repeat from the 1st to the 4th row to the required snood height. Close the loops and hide the thread.

Scarf-hood

In order to knit a scarf-hood for a child aged 7 - 9 years, you will need 3 skeins of warm bulky yarn 100 m/100 g, containing 25% wool, circular knitting needles No. 5, a sewing needle, a marker for the beginning of a row, a hook No. 5 ,5.

Step-by-step instruction:

1. Cast on 80 stitches on the knitting needles and one extra stitch to join the knitting in a circle.
2. Knitting begins with a pearl pattern: alternate knit and purl stitches at the end of the row. The loops are knitted behind the front wall. At the end of the row, so as not to get confused later when knitting, hang a special marker.
3. In the second row, the alternation of stitches changes: the purl stitch is knitted above the front stitch of the previous row, and the knit stitch is knitted above the purl stitch.
4. From the 3rd to the 6th row inclusive, the 1st and 2nd rows are repeated.
5. From the 7th to the 22nd row, knit stitch is knitted (all stitches are only knit stitches).
6. 23rd row: the first 37 loops are knitted behind the front wall, then 6 loops must be closed - for this, loops 38 and 39 are knitted, then the 38th loop is removed from the knitting needle through the knitted 39; the 40th loop is knitted, removed from the needle 39, and so on up to the 43rd loop inclusive. The next 37 stitches to the end of the row are knitted.
7. From the 24th row, the transition to knitting in turning rows is made. It is necessary to knit a row to the closed loops, the last loop before the closed one is knitted purl-wise behind the front wall, the knitting is turned.
8. 25th row: the first loop is removed unknitted, then all loops to the end of the row (until the next closed loop) are knitted purl over the front wall.
9. In the 26th row, decrease two stitches: knit the first and last 2nd and 3rd stitches into one.
10. Next, continue to knit in stockinette stitch (that is, the front rows are knitted with facial stitches, the purl rows are knitted with purl stitches, the first edge stitches are always removed, the last ones are knitted with purl stitches) until the required height of the hood.
11. Once the required height of the product is reached, sew the two halves of the hood using a knitted seam.
12. Proceed to knitting the lapel. To do this, cast on the front loops, starting from the first closed loop in the 23rd row, around the entire circumference of the resulting hood; their number should be odd in order to close the product into a circle. Knit all the cast-on loops with a pearl pattern, repeating the steps from the 1st to 2nd row of the beginning of knitting, to a height of 12 rows. Then sew on the resulting lapel, that is, sew the 1st and 12th rows of the lapel together using a knitted seam.
13. Start knitting ears. To do this, crochet 6 single crochets into the amigurumi ring. In the second row, increase by 1 single crochet in each column of the previous row, that is, you will end up with 12 stitches. In the 3rd row, increase every second stitch, resulting in 18 single crochets. In the 4th row - an increase is made in every third column, resulting in 24 columns. The 5th, 6th and 7th rows are performed without additions. The first eye is ready, cut the thread, leaving a long tip for later sewing it to the hood. Knit the second ears in the same way. Fold each ear in half and sew to the hood.

Reversible scarf with pompoms

A reversible scarf is a scarf that looks equally good on both the front and back sides. In order to knit a universal double-sided scarf for a child, you will need 3 skeins of thread of 50 g (130 m), 25% wool, knitting needles No. 2, 1 additional knitting needle for forming a braid, crochet hook No. 3. Abbreviations: l.p. – front loop, from p. - purl loop.

A knitted scarf with the description in the pattern for a child can be worn on both sides.

Step-by-step instruction:

1. Cast on 40 stitches + 2 edge stitches on the knitting needles. Knit stitches are knitted on the back wall, purl stitches on the front wall. The scarf is knitted in turning rows. The first loop is always removed unknitted, the last one is purled.
2. Main drawing:

• in the 1st, the first edge is knitted (braid element: (2 p., 2 p.) × 2 times; elastic band - 1x1 - 8 times) - do it twice. Complete the row 2 (2 p.p., 2 p.p.) × 2 times and the last edge.
• The 2nd – 4th row is performed similarly to the 1st.
• in the 5th row, start forming a braid: edge loop, (using an additional knitting needle, re-knit stitches 5 to 8 inclusive on the front and knit them first 2 l.p., 2 i.p..; then repeat another 2 l. .p., 2 sts, perform an elastic band of 8 loops 1 lp, 1 st) – repeat 2 times. Complete the row by forming another 1st braid: slip the penultimate 4 loops on the knitting needle onto the front knitting stitch, perform them first: 2 knitting stitches. 2 stitches, perform the remaining loops 2 stitches, 2 stitches and an edge stitch.
• Knit the 6th – 8th row in the same way as the 1st.
• Repeat for the required length of the scarf from rows 1 to 8. Close the loops.

For a pompom with a diameter of 5 cm, cut out 2 round blanks from cardboard: outer diameter 3 cm, inner 1 cm. Make a slot between them. Place them together, laying a thread between the pieces. Wind a thread around this workpiece through the slot so that the internal diameter decreases by approximately 2 times.

Cut the wound thread along the outer diameter, while tightening the thread laid between the workpieces. Remove the blanks. Trim the uneven edges of the pompoms. Make 2 more pompoms. Tie the resulting pompoms to the scarf in places where 9 single crochets are knitted. Similarly, decorate the other edge of the scarf.

Original cat scarf

To create such an original scarf for a child, you will need 2 skeins of yarn of different bright colors 500 g/100 m, knitting needles No. 2, hook No. 3, and a sewing needle with a large eye. Abbreviations: sbn. - single crochet.

Step-by-step instruction:

1. The scarf is knitted in stockinette stitch, that is, the front side is worked with knit stitches, and the back side with purl, turning rows.
2. Cast on 40 stitches on the knitting needles, including 2 edge stitches, the first of which is removed, the last one is always done purl-wise. Knit a scarf to the required length, periodically changing threads of different colors, thus making the future scarf striped. Close the loops
3. For the paws, cast on 28 stitches and knit to a height of 48 rows. To bevel the foot, decrease the stitches. To do this, in the 49th front row, knit the 1st and 2nd, 13th and 14th, 15th and 16th loops in one loop, knit the last two loops also in one, but purl loop. The 50th purl row is knitted unchanged. In the 51st row, decrease again: knit the 1st and 2nd, 11th and 12th, 13th and 14th in one loop, and purl the last two. Row 52 – no changes. In the 54th - close the loops. Sew the foot along the long side. Using this pattern, knit all 4 legs.
4. For the tail, cast on 14 stitches and knit them to a height of 58 rows. Decrease the stitches, forming a tail bevel. In the 59th row, knit the 1st and 2nd, 6th and 7th, and the last two loops in 1 loop. Complete the 60th row without changes. In the 61st row, knit the 1st and 2nd, 5th and 6th, and the last two loops in one. In the 62nd row there is no decrease. In the 63rd row, cast off the remaining 8 stitches.
5. For the cat's head, cast on 24 stitches. Work the first 2 rows in stockinette stitch. In the next 3rd, 5th, 7th, 9th, 11th and 13th rows, increase stitches in every 2nd loop at the beginning and at the end of the row: knit two loops from one of the previous row. Next, without changes, perform from the 14th to the 34th row inclusive. From the 35th row and further in the 37th, 39th, 41st, 43rd and 45th rows, make decreases: knit every second and third loop in one loop from the beginning and from the end of the row. Knit the second part from threads of a different color in the same way as the first.
6. For the muzzle, cast on 20 stitches on the needles. For bevel in the 3rd, 5th and 7th row, add one stitch to every 2nd stitch from each end of the row. In the 15th, 17th and 19th rows, decrease by knitting 1 loop every second and third from each end of the product. In the 23rd, 25th and 27th rows, increase loops in every second loop on both edges of the fabric; in the 35th, 37th and 39th rows, decrease these loops. In the 41st row, close the knitting. Fold the piece in half and sew along the edge.
7. The ear consists of two triangles of different colors, but the same size. For one eyelet piece, cast on 16 stitches on knitting needles. Knit them in every odd row, starting with the third decrease in stitches, knitting together every first and second stitch from the beginning and end of the row. Until there is 1 loop left on the needle. Finish knitting. Knit two parts of one color and 2 of another. Place two pieces of different colors together and crochet their edges with single crochets. The ears are ready.
8. You can buy ready-made eyes and knit them according to the following pattern. Each eye consists of 3 parts.

• The first part is made of white threads: cast on 12 loops, starting from the 3rd row, knit every 1st and 2nd loop together. In the 11th row close the loops.
• The second part is made of blue or green threads. Crochet. 6 sc. dial amigurumi into the ring. 1st row: knit 2 sc in each stitch. 2nd row increase in every second sc. The result will be 18 sc. Finish knitting.
• Third part: dial 6 sc into the amigurumi ring. In the first row, increase each stitch by knitting 2 sc. Finish knitting.
• Sew all the parts together. Repeat the steps for the second eye.

1. For the nose, also knit 6 sc. into an amigurumi ring. Increase on each sc. In the third row, decrease: sc, decrease to the end of the row. The remaining 6 sc. pull off.
2. Sew all the details. Lightly fill your head with padding polyester.

When making such an unusual knitted scarf for a child as a cat scarf, the cat’s head can be “combed” with a slicker brush so that its head fluffs up.

Video: knitting a scarf with a description, patterns for a child

Find out how to knit a children's scarf in the video:

Knitted children's scarf, Swedish elastic pattern in the video clip:

There are many options for knitting and crocheting children's scarves for boys. Knitted scarves for boys can also become the basis for a scarf and hat set. The same model can be decorated in a different color or add an applique and knit a set for a girl.

Knitting and crocheting children's scarves is a fun, creative activity; you can spend this time with your baby, selecting threads and coming up with decorations for the accessory.

Product with a braid pattern

The scarf is 16 centimeters wide, and its length is approximately one meter and forty centimeters.

For knitting you will need 100-150 g of blue yarn Schachenmayr SMC Silenzio. The composition of this wool blend yarn is 25% wool, 25% alpaca, balanced by 50% polyacrylic content. The thickness of the thread is 60 meters/50 g. You will also need straight knitting needles No. 6.5.

The main pattern of the product: 2/2 elastic band, where 2 front loops alternate with two purl ones.

The braid pattern is made according to the diagram. Rapport is repeated from the first to the eighth row.

Scheme of the "Braids" pattern

Knitting density of the braid pattern: in a square pattern with sides of 10 centimeters horizontally, there are 16 loops and 18 rows in height.

To make a scarf for a boy cast on 26 stitches on knitting needles and knit four centimeters with an elastic band as follows: we knit the first row purlwise, then remove the first edge loop, knit one purl loop, then knit 2 knit stitches. When we tie the elastic to the required length, we knit the scarf fabric further with a “braid” pattern, removing the first edge.

When the length of this part of the scarf with the pattern reaches 136 centimeters, we knit a 2/2 elastic band in a mirror with the beginning of 4 centimeters and finish the work by closing all the loops.

In order for the product to have a finished look and be made with high quality, it is important to correctly secure the remaining thread. We leave the end of the thread longer and carefully thread it under the edge loops with a knitting needle, passing the thread in one and the other direction so that it is well secured. We cut off the end.

Scarf pattern for a boy

This model is suitable for a teenager, and for a mature man.

Using a blue thread, cast on 39 stitches on knitting needles with a diameter of 3 mm. This number of loops will be equal to three repeats and one loop for symmetry, plus 2 edge loops.

We begin to knit the main fabric of the boy’s scarf as follows: we knit all rows with knit stitches. This will be a garter stitch, knitting 6 rows like this, attach a blue thread and continue with the same pattern for 2 more rows. Then we knit 24 rows with the main pattern.

Attach the blue thread and work 4 more rows in garter stitch. Then, add the blue thread again and, using the main pattern, according to pattern number 1, knit another 12 rows. Next, we attach the blue thread, use it to knit 4 rows in garter stitch and, having also finished, add the blue thread again and continue to perform the main pattern.

In this way we form the main fabric of the product. We should have 21 stripes of blue thread. We finish the scarf according to the beginning, only in reverse order. Carefully tuck in the end.

We knit a scarf approximately 110 cm in length, and the width of the canvas should be 17 cm.

Rules for performing the main pattern

The number of loops is a multiple of 12 + 2 edge loops. At the beginning and at the end of the row, observe one edge loop. The knitting pattern is as follows:

The pattern is repeated from the first to 24 rows.

Make the main pattern using knitting needles according to the pattern.

You can knit a hat with this scarf and create a stylish and practical set for your baby.

Size: 104−110.

Calculations are given for a head circumference of 48−52 cm.

To make a set of hat and scarf you will need: Baby wool yarn (ALIZE) - 250 g blue and 50 g light blue. This wool blend yarn is soft, warm and not itchy. We take the yarn in two threads. We will need circular knitting needles No. 3, a set of 5 double needles No. 3 and a device for making pom-poms or just cardboard circles of the required diameter.

Hat with pompom: description

We knit a circle on 4 double needles, adding loops in the circle. First, cast on 8 loops with blue yarn and distribute them on 4 knitting needles.

All rows are circular:

To our 88 loops we need to add 8 more so that we get 8 repeats. Rapport is equal to 12 loops. The total will be 96 loops.

We knit another 48 rows with the main pattern.

We make another repeat of the stripes. We finish the work with blue yarn, knit 6 rows in garter stitch and bind off the loops.

Now we need to make a pompom. To make a pompom we will need: thick cardboard with a diameter equal to the desired volume of the pompom, scissors and yarn. Cut a circle out of cardboard and make a hole in the center so that the width of the cardboard blank matches the volume of the pompom.

For ease of winding, cut the resulting “donut” on one side. When winding the yarn, ensure uniformity and density. When you have wound enough, use a needle to thread the thread from the bottom edge of the winding along the cardboard so that when we cut the top, the bottom can be tied with this thread. The top of the hat needs to be sewn. Sew the finished pompom to the hat.

Children's scarf crochet

This crochet scarf is suitable for both boys and girls. By selecting colors, you can create different options, and if the model is made for a girl, the scarf can be decorated with appliqué or beads. There are many options for how to decorate a children's scarf for a girl.

When crocheting, work is done from the center of the fabric in a circle. The chain should be assembled taking into account the fact that the product is stretchable. This means that the initial track of air loops needs to be knitted a little longer, taking into account the number of loops for repeat. It is equal to 6 loops, so the total number of air loops must be a multiple of 6.

The most suitable yarn for such a children's openwork crochet scarf should be thin. It can be 350-400 meters per 100 grams. To make a scarf from yarn of this thickness, a 1.75 mm hook is suitable:

Attention, TODAY only!

In winter, severe frosts and cold winds give the most unpleasant sensations during walks and. To keep your baby warm, knit him a very warm scarf. Honestly, when I knitted it for my child, I realized how warm an ordinary scarf can be if you choose the right yarn and pattern for the scarf.

Knitted scarf for beginners - children's scarf

You will need:

• knitting thread ALISE CASHMIRA - 2 skeins of gray and 1 skein of graphite color,
• knitting needles No. 4.

The finished scarf comes in the following sizes: length 102 cm, width 18 cm. By the way, it stretches perfectly: it is a little less than one and a half times in length, and about two times in width. At the same time, it always retains its shape and does not become a “rag” or “gut”.

How to knit a scarf with knitting needles (children's scarf).

First of all, I want to say about the threads: these are natural wool threads (cashmere), which do not prick and provide excellent warmth. Of course, you can choose another option, but for some time now these have been my favorite threads for children's knitting.

So, cast on 50 stitches on the knitting needle.

Knit the auxiliary row alternately 1 knit, 1 purl until the end of the row.

The next row needs to be knitted with the main pattern. A voluminous English elastic band is perfect for a warm scarf. It's not difficult to knit.
It is enough to remember just one row visually or audibly and you will no longer need to write down the pattern for the scarf.
We knit all the front loops of the pattern - that is, we knit it as we see it, and immediately after the front one we make a yarn over.
We also remove all the purl loops from the knitting needle with a purl loop without knitting - that is, we simply transfer it from the auxiliary knitting needle to the working one, and the thread at the same time before work.
We use this principle in each row until the end of knitting.

To make a striped scarf, alternate light and dark threads as follows:

1. First, 32 rows in gray. Don’t be surprised that there are so many - visually the number of loops in height in a column will be exactly half as much.

2. Then we introduce a dark thread into the work and knit two rows of dark and light. Here again you will visually alternate one row of each color due to the specificity of the pattern. However, this gives an advantage over other scarf patterns: the threads are changed on one side, and the stripes turn out to be thin in one line and original.

3. The next stage of alternating stripes is 16 rows, first light and then dark. Here you get two thick stripes.

4. Knit 52 rows in dark color.

5. Knit the very middle of the scarf with light threads. I got it in 260 rows.

Then we close all the loops and invite our beloved child to try them on!

To be honest, I knitted this scarf in two evenings. Considering my experience as a knitter, I don’t look at the knitting needles while knitting, so I could simultaneously enjoy watching my favorite films. Now you know how to knit a scarf, so you can safely get down to business. Good luck and have fun!

Knitting a children's scarf with knitting needles is not difficult. You can take any pattern: stockinette stitch, 1x1 elastic, 2x2 elastic, tangle, determine the length and width of the scarf and that’s it. Such a scarf will be strict, boring, and your child is unlikely to appreciate it. Therefore, we decided to offer several models of funny scarves that you can knit for your child. Choose a knitted scarf for a girl or a boy and knit it as an unusual accessory to a hat or a new coat.

Children's scarves knitted from our website

Scarf for a boy. Svetlana's work

Svetlana sent a set to the competition: a hat and scarf. And we decided that such a wonderful scarf should definitely be included in our selection. After all, it can be knitted not only for a boy, but also for a man or a teenager. If your child has grown beyond the age of “funny” scarves, then knit this pattern for him.

Green scarf with strawberries. Maya's work

The highlight of this scarf is, of course, the chosen yarn. The result is fluffy grass, red strawberries go well with it. Although the scarf is usually knitted in garter stitch, it looks interesting.

interesting selection for the site Large selection of openwork scarves

Mouse scarf. Lena's work

The scarf is knitted from the remnants of different threads. A very suitable option for children. Mice can be white, gray, black or even striped. It all depends on your imagination and choice of color. The idea is not new; similar scarves - cats, tigers and others - are most often crocheted. You can take a tack pattern, appliqué, knit 6-10 identical elements and connect them in one line. Your scarf is ready.

Knitted hat and scarf for a girl. Helen's work

Nice set with a strawberry theme. A scarf with a hole on one side, you can simply tighten it. The child is comfortable, there will be no thick knot on the neck. The scarf idea can also be played out in different ways, depending on the color of your threads.

Knitted pink scarf for a girl. Tatiana's work

Cat scarf. Anastasia's work

The scarf is knitted according to the description posted Description, unfortunately poor. Only a pattern and a general idea are given. How to knit a cat's face, you will have to look in other descriptions.

Scarf - sheep knitted. Work by Alekseeva Lyudmila

Lyudmila has compiled a fairly detailed description, although the decorative elements of the scarf: the muzzle and paws are crocheted. You can borrow the description to knit the previous cat scarf.

Children's scarf with a loop. Maya's work

The scarf is knitted in different patterns: garter stitch, stockinette stitch, stars. Decoration: crocheted flower.

Scarf with bobbles. Work by Natalia Gutora

The scarf itself is simple to make, its highlight is the pompoms. Fun and unusual.

How to make pompoms from yarn:

You will need: yarn of 3 or more colors, knitting needles No. 3. This article has a fairly detailed description. If you still decide to knit an animal scarf, then use our description. Larisa's cat turned out to be charming.

Natalya Klimtseva sent us several funny scarves. It's a pity that there are no descriptions for them. But you can take an animal scarf as a basis and make it the face of a bear, bunny, pig or someone else. And if, in addition to the scarf, you knit a hat and mittens, then your child will become the owner of the same wonderful set.

Children's scarves knitted from magazines

Scarf with braids for a boy

We love this stylish set: a hat and scarf for a boy with a braid pattern. See the description and diagrams for it. The size of the scarf is 140*16 cm. But of course you can knit the size you need.

This voluminous scarf is suitable for a child of any age: both a baby and a teenage girl. You will need: 100 g HOBBY yarn (100% polyester: 100 g/40 m) orange.

Knitting a children's scarf, models from the Internet

Original scarf made of rings with knitting needles

This model is not only simple to implement, but very original. And even a schoolboy can knit it. Recycle any leftover threads and wear the scarf as a necklace on a dress or sweater.

Scarf crocodile or frog

In the magazine this scarf is called a crocodile, but in our opinion the muzzle is a little short for a crocodile. And my child says it's a lizard. It's up to you to decide who is right. But we found the scarf interesting.

Knitted bunny scarf

This scarf model is for a girl, but if you knit a bunny with gray threads, you can give it to a boy.

Knitted raccoon scarf

The raccoon scarf is knitted on 2 knitting needles.

For it you will need gray, black and white yarn, 2 knitting needles, a needle with a large eye (to hide the ends of the threads and sew the parts together).

Knitted children's scarf - fox

This scarf is knitted similarly to the raccoon scarf. The color scheme can be any. A cute children's knitted scarf in the shape of a fox, made with knitting needles. However, it is suitable not only for children; adults can also knit this model for themselves. There are knitting descriptions for both small and large sizes.

The owl turns out voluminous and textured. And it looks very good knitted from light yarn. I tried to knit a pattern with bright blue threads, the whole pattern was lost and the owl was hard to see. Therefore, I chose a yarn of pale blue, muted color.

Children's scarf with a braid

Semenovskaya yarn “Svetlana” 250 g / 100 m, wool 50%, acrylic 50%. Phlox color.
Yarn consumption: 120 g. Tools: knitting needles No. 3, knitting needle.
The horizontal knitting density of pearl knitting is Pgzh = 2 loops in 1 cm, the width of the braid is 3.5 cm.
Scarf size: width 15 cm, length 120 cm.

Knitting for children is a great opportunity to show their imagination and experiment with colors and types of yarn. When choosing materials for working with “adult” things, for example, for ourselves or our friends, we rarely opt for non-standard compositions of materials or bright color combinations. Not everyone is lucky enough to work with yarn for knitting children's clothes or toys, so I suggest knitting a bright, very warm and cozy children's scarf. Please your child, or give a nice gift to your friend's young mother.

Knitting a baby scarf

We knit a children's scarf using knitting needles based on a unique master class from Ekaterina Kuryleva.

To begin with, let’s choose a warm, soft “plush” yarn for knitting children’s clothes. Despite the artificial composition, it is absolutely hypoallergenic, does not irritate the skin, does not cause itching, retains heat well, and also, which is very important for children's things, is very simple and unpretentious to care for. Our baby scarf is knitted from “Bambi” yarn from the Nazar brand, in a rich green color. This color is suitable for both boys and girls. The skein is 142m/50g, one is enough for us to knit a scarf for a child.

Also, we will need a tool suitable for the threads; in this case, the accessory is knitted with knitting needles No. 4.5.

To decorate in the shape of a strawberry, you will need yarn of any composition in red, white and green colors. These can be small balls that usually remain from knitting large items, the use of which is usually very difficult to find. I think every craftswoman understands what we’re talking about!
The template will require cardboard, as well as scissors and a hook.

Children's scarf snood crochet hood - simple pattern

A hat and snood set will be an excellent decoration for your baby’s look. The baby's head and neck will be protected from the cold. Choose soft threads for knitting such a set so that your baby is comfortable.

This set is knitted simply: regular single crochet stitches, skipping one stitch between stitches. The snood dimensions are 50 cm in full length. It does not need to be knitted long so that it can be put on without turning, otherwise it will be uncomfortable for the baby.

Single crochet pattern:

Crocheted hat and snood for a boy - description:

Snood

• Cast on a chain of air loops and knit so that its length is 50 cm.
• Now knit with a single crochet until the end of the row.
• In the next row, insert the hook under both threads of the tops of the columns of the previous row.
• Knit this way to the desired length of the product.

cap

• First, knit the circle with columns with an increase of 7 cm in diameter - this will be the top of the hat.
• Then continue knitting, adding twice as many stitches in the next row. Knit in the round, completing the ring.
• When you have knitted another 15 cm of the hat, finish knitting.

Make a small pompom with a diameter of 5-7 cm and sew it to the finished product.

Remember: If you know how to knit complex patterns, then create a more interesting set for your baby. But for a boy, choose soft threads, and the pattern should not be openwork.

For example, you can knit this light green set:

Crocheted hat and snood for a boy - gray and light green color

Any girl will love this set. It is suitable for wearing in the off-season, and if you knit the hat with thicker threads, or sew on a lining, then you can wear it in winter.

Such a brown hat and crocheted snood for a girl will turn out to be very warm, since these products are knitted with large knitting. The pattern is simple, the cap size is 54 cm, the snood is 85 cm in full length.

The knitting pattern consists of creating a circle of stitches and air loops. Then the cap is knitted without adding single crochets. Bottom of the cap with a stitch behind the back loop.

Detailed description:

A cap

• Cast on 3 chain stitches and close the circle.
• Knit the second row with single crochets - there should be 9 of them.
• Third row - single crochets - 18 pieces.
• The fourth row is in columns, but without additions.
• Increase the fifth row every 3 stitches.
• Knit the sixth row in stitches without increments.
• Increase the seventh row every 4 stitches.
• Now knit without adding to the required length. Do not knit until 3 cm.
• Knit the last rows into a loop behind the back wall. You will get an interesting headband that gives the hat a special style and uniqueness. In addition, this headband will be tighter, so the headdress will fit well on your head and will not move out.

Ears - 4 parts (2 - brown, and 2 - white)

• Knit 8 rows, adding loops to make the following: Row 1 - 1 single crochet, Row 2 - 2 stitches, Row 3 - 4 stitches, Row 4 - 6 stitches, Row 5 - 6 stitches, 6-7-8 th rows - 8 columns each.
• Tie the ears for beauty.
• Sew the white parts into the brown ones and trim off the excess threads.
• Sew the ears to the hat. You can decorate your hat in the form of a large button.

Snood

• Cast on air loops to make a chain 85 cm long.
• Knit a row with double crochets and 2 rows with relief stitches: 1 knit stitch and 1 purl stitch.
• Now knit 15 rows with single crochets.
• After this, make 2 rows with raised stitches and 1 row with double crochets.
• Make embroidery in the form of a nose and antennae - the snood is ready!

If you wish, you can knit mittens with this set. They are easy to knit, if you don’t know how, then watch the video.

Video: Knitted mittens Knitting for beginners

Another interesting crocheted kit. The hat is voluminous knitting, and the snood is single crochet.

Beginners need 1-2 days to crochet a snood. If you are just learning how to create knitted items with your own hands, and it seems to you that knitting a snood takes a long time, because you need to knit every row, then watch the following video. In it, a woman knitted a warm scarf-collar in just half an hour - quickly and easily.

Every mother loves to knit new clothes for her child. In order to knit most children's patterns, you do not need to be a professional craftswoman.

If you are the mother of a wonderful boy, then this article will be interesting and useful for you.

Here you can find a description of two completely different, but very light and effective scarf models for your child.

This scarf is easy to make, but looks very unusual and colorful. It is known that all children love bright and rich colors. And alternating blue, white and red shades will never go out of style.

Materials:
Only two hundred gamuts of yarn are needed. If you are planning to knit a pattern for winter, then choose thick wool yarn that will warm your boy in any weather. And for spring, thinner yarn is needed.

Drawings and patterns:

1. Elastic band 3x3 (three knits and three purls alternate to the end, and in the purl loops are knitted according to the pattern). 2. Garter stitch. All loops in each row should be performed only with facial stitches. 3. Front stitch. Purl rows: purl loops, and knit. rows - facial loops. 4. “Creative elastic band”: 1st row: all stitches are knit; Row 2: purl four and knit three. Repeat these two rows.

Sequence of work:

Cast on with knitting needles and knit thirty-three loops with dark blue thread. Knit twenty-two rows of the scarf with an elastic pattern, which is indicated in the description under No. 1. Now introduce a light gray thread and knit the next four rows in garter stitch, which is indicated here under No. 2. After this, change the light gray yarn to yarn burgundy color and perform six rows with the stockinette stitch pattern No. 3. Change the working thread again to a gray thread and knit the next four rows. pattern No. 2. Now the blue thread comes into play and it remains on the knitting needles for another six rows of stockinette stitch.

That's the whole wisdom of alternating stripes. In order for this alternation to be easy and to avoid unsightly knots when working with knitting needles, it is best not to break the threads, but simply cross them each time you change colors. Alternate the indicated sequence for sixty rows, and then proceed to knitting a creative elastic band. With this pattern you will do the work for the next one hundred and seventy rows. After that, we move on to the stripes and repeat everything in reverse order. All that remains is to finish the job with the same rubber band with which it all began. Close the row, and hide the resulting piece of thread with a hook among the loops. Now your scarf can be washed in cool water and then dried on a terry towel.

Model No. 2

Materials:
For this scarf, yarn that has the following composition is best suited: fifty percent acrylic and fifty percent natural wool. Just one hundred grams of yarn. No alternation of threads of different colors is required here, since this funny pattern is obtained arbitrarily due to the special section-dyed yarn. You also need size 4 knitting needles, and to finish the edge of the scarf you will also need a hook.

Sample:
Take twenty-four loops and knit twenty-four rows. You should get a square sample measuring 10 x 10 centimeters.

Subsequence

Cast on forty stitches on the knitting needles. Knit with an elastic band 1 x 1 (alternate one knit and one purl until the very end, and knit according to the pattern on the purls) for about one hundred centimeters, depending on your boy’s preferences. In the last row, bind off all the loops, but try not to tighten the thread. Important!!! There is no need to break the thread at the end, as now you need to start crocheting.

Finishing

Make five chain stitches, one double crochet, skip one warp loop, a chain of four chain stitches. Repeat in a similar way until the end of the scarf, and all that remains is to make a chain of 5 air loops and fasten the thread. The same finishing must be done on the opposite side of the scarf. If there is a desire and there is a lot of yarn left, then a similar crocheting can be done not on two sides, but on all four sides of the scarf. This little trick gives any knitting airiness and lightness, and the product itself seems weightless.

Honeycomb Scarf

The scarf is just a miracle. Just what I wanted! The scarf knits quickly. I have already knitted 3 myself, and each one took me two evenings.
I received permission from the author to translate and publish in Russian. So knit and show off!

White scarf- adult size.
Knitted from Cara Mia threads from Needful Yarns (100% merino, 50g - 90 m. Knitting density 19p x 10cm).

Gray scarves- children's.
Knitted from Zara threads from Filatura di Crosa (100% merino, 50g - 125m. Knitting density 22p per 10cm)

Materials:

1-2 skeins of thread. The thicker the thread, the warmer and thicker the scarf.

Knitting density: does not matter.

(I knitted a scarf as a set with an Elastic Band Hat).

Method:

Cast on 4 loops.
Row 1 (knit): K1, add a loop (knit the front and back wall of the loop), knit, add a loop, k1.
Row 2 (purl): knit.

Repeat rows 1 and 2 until you have 28 stitches. Finish with the 2nd row.

Start a honeycomb pattern.

Honeycomb Pattern:

The first two and last two loops are always knitted.

Row 1 and 3 (knit): K2, P2, (K2, P4)x3, K2, P2, K2.
Row 2 (purl) and all even rows: Knit the first 2 stitches. Next, purl and knit stitches according to the pattern (i.e. as you see them). Finish with 2 knits. All purl rows will continue to be knitted this way.
Row 5: 2 persons, *2p for extra. knitting needle (keep at work), k1, 2p with additional knitting needle, knit 1p on additional knitting needle (hold before work), p2, knit a knit loop with additional knitting needle* Repeat * until the last 2 loops, k2.
Row 7 and 9: K2, *P4, K2* repeat to last stitch, K1.
Row 11: k2, *1p on additional needle (keep before work), purl 2. knit faces. loop with additional needle, 2p on additional needle. knitting needle (keep at work), k1, k2 with additional knitting needles.* Repeat * until the last two loops, k2.
Row 12: like Row 2
These 12 rows make up the honeycomb pattern. Knit in this pattern until the scarf is approximately 43 (60) cm long. Complete Near 12.

Next row (front row): *K1, slip next stitch onto stitch holder*
You should have 14 stitches on the needle and 14 stitches on the holder.
Next row (purl): persons

Now it will be knitted like faces. every first and last stitch.
Row 1 and 3: k1, p2, k2, p4, k2, p2, k1.
Row 2 and all even rows: knit 1, then purl and knit stitches according to the pattern (i.e. as you see them), knit 1.
Row 5: K1, (2p on an additional needle (keep at work), k1, 2p with an additional knitting needle, knit 1, 1p on an additional knitting needle (keep before work), p2, knit a loop with an additional knitting needle) x2, 1 persons
Row 7 and 9: K2, * P4, k2* to end
Row 11: k1, (k1 on an additional needle (keep before work), p2, knit a knit loop with an additional knitting needle, 2p on an additional knitting needle (keep at work), k1, p2 with an additional knitting needle) x2, 1 persons
Row 12: like Row 2
Knit approximately 5 (10) cm in this way. Move the loops to the holder.
Now knit the other 14 1x1 loops with an elastic band of approximately 5 (10 cm).
Next row we combine the loops: knit 1 loop from the knitting needle, the next from the holder. Alternate in this manner until all 28 stitches are on one needle.
If you finished this row on the right side, then simply knit the next row.
Start the Honeycomb pattern on Row 1 and work approximately 6 (15)cm.

We begin to decrease the loops:
Row 1: K1, slip off the stitch as a knit, knit the next one as a knit, throw the removed one over it, knit. to last 3 stitches, k2tog, k1.
Row 2: persons
Repeat these two rows until you have 4 stitches left. Close them.
Hide the tails of the threads. Ready!

In the wardrobe of any child, both boys and girls, there are always various scarves. They are simply necessary for children because they provide reliable protection from the cold.

An ordinary scarf covers the baby's neck, perfectly complementing the high collar or raised hood of the jacket. In addition, a beautiful scarf makes a child look like an adult, stylish and elegant, which brings children a lot of joy and pleasure.

To knit a beautiful scarf, let’s make a choice, because there are many models, patterns and colors of fashionable children’s scarves. It is necessary to choose the right yarn, as well as the necessary knitting needles, which will be used for children’s handicrafts. For beginners, simple patterns such as garter stitch, tangle stitch, 1x1 rib stitch or checkerboard stitch are suitable.

Knitting a scarf with a checkerboard pattern

This pink elegant scarf for a girl is very simple to make.

A regular chess pattern is used for knitting it, so even a novice craftswoman can make the model. Knit a children's accessory according to the pattern. The diagram, like the pattern itself, is not difficult to work with and is located here.

Video: Children's scarf with a bear

Knitting a soft scarf with strawberries

The attractiveness and highlight of the children's model is that it is made of unusual yarn with an uneven voluminous texture. As a result, the children's canvas visually resembles grass, and pretty red strawberries adorn it very appropriately. We recommend yarn (160 grams) of Atelimo poli type, light green shade, and knitting needles No. 7.

We cast on 18 loops (P) with knitting needles and continue knitting. The work does not require a pattern, because the fabric is knitted with garter stitch, that is, from facial loops.

The accessory is suitable for both boys and girls. Bright strawberries will delight any child. Knit red strawberries with green leaves and embroider white dots on them. At the end of the needlework, sew them in the end zones of the children's accessory.

Knitting a scarf with a loop

Another children's scarf in addition to the strawberry hat, which has a hole on one side. It is convenient for the baby precisely because it is easy to tighten it without forming a thick, uncomfortable knot on the neck.

1. Cast on 32 stitches using size 3 knitting needles and knit 12 rows with a cross elastic. The result is two rollers, as in the photo.
2. Then we knit twenty rows (P), and close twenty middle Ps to form a hole. This hole is necessary to thread the second end of the children's scarf into it.
3. In the next P, the missing loops must be cast on again, and knitting continues at an arbitrary length. At the end of the fabric we again knit the same rollers as at the beginning.

If you want to knit a colorful and fun children's scarf, then pay attention to models depicting different animals.

Video: Children's scarf-loop

We knit a children's “Koto-scarf”

To knit a cheerful children's scarf, you will need three hundred grams of gray and one hundred grams of white yarn, as well as knitting needles No. 3.5.

If desired, this technique can be used as a basis to make a children's scarf of a bear, bunny or other animal. It is enough to make another face, and now the bear is ready for the child.

Video: Children's scarf Raccoon

Scarf with voluminous braids

To make such a children's scarf with braids, we use knitting needles No. 6 to twenty-six P, and knit 4 cm with a 2x2 elastic band. The pattern for knitting braids is in the photo.

This pattern is knitted along the entire row, between the outer edge loops. You will get two complete repeats of the Braid pattern, plus two edge loops. The total length of the “Braid” pattern is one hundred thirty-six cm, after which we knit again four cm with an elastic band and close the loops.

Snood for children

Modern kids really like the now fashionable children's snood scarves, collars, and headscarves. Such children's products look especially stylish if they are knitted from thick threads with coarse knitting. Even the most primitive garter stitch allows you to create an extremely impressive children's snood, as shown here in the photo.

This model, the so-called snood collar, is knitted for children from mixed yarn, which includes wool and acrylic.

For a child from 5 to 10 years old, the size of the snood is 22 in width and 70 cm in length. The full gauge is nine stitches and 19 rows in a 10x10 cm pattern. We will need 200 grams of yarn, size 8 knitting needles, large buttons and snaps.

Warm snood collar

This original version of the scarf combines both a snood and a collar.

The diagram shows that the snood pattern consists of alternating knit loops (KL) and purl loops (IP).

As can be seen from this photo, the width of the snood is 26 cm x 2 = 52 cm.

Video: Children's scarf snood

Scarf shawl for girls

This kind of scarf, knitted with long stripes, is now at the peak of fashion and popularity, even among children and teenagers.

The stripes can be of different lengths and widths, and are connected to the scarf at the end of the work. As a rule, these strips should have fluffy pompoms or tassels at the end, as in the photo. To make lush tassels for such a scarf, you need to prepare rectangular-shaped cardboard and wind yarn on it in this sequence.

Video: Children's scarf

Scarf with pompoms

To conclude the lesson, we’ll look at knitting a simple but elegant scarf for a girl. We make a light scarf with stripes in garter stitch. This classic model is made from mixed yarn, which should include wool and cotton. If you purchased thick yarn, then you need to knit it with needles No. 8. The density of the fabric will be 13 loops and 16 rows in a 10x10 cm pattern.

1. We begin needlework with a set of loops in the amount of 6 pieces. Having cast on the loops, we knit the fabric, adding 1 loop per rad.
2. We bring the width of the row to 22 loops, after which we knit the fabric in a straight line, passing white yarn in every second row.
3. We insert white yarn ten times, after which we knit only with gray yarn.
4. When the fabric is knitted to the middle, we begin to do the work in the reverse order, knitting it in a mirror image.
5. At the end, there should be 6 loops left on the knitting needle, which are closed last.
6. To complete the needlework, sew on the pom-poms.

Video: Reversible scarf with pompoms

Patterns with descriptions for knitting children's scarves